Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT24C11N-10SI-2.7-T

AT24C11N-10SI-2.7-T

Overview

Product Category

AT24C11N-10SI-2.7-T belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.

Use

This product is primarily used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile memory: The AT24C11N-10SI-2.7-T retains stored data even when power is removed.
  • High storage capacity: This EEPROM chip has a storage capacity of 1,024 bits (128 bytes).
  • Serial interface: It communicates using a two-wire I2C serial interface protocol.
  • Low power consumption: The AT24C11N-10SI-2.7-T operates at a low voltage of 2.7V and consumes minimal power during read and write operations.

Package

The AT24C11N-10SI-2.7-T is available in an industry-standard 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact and low-power package.

Packaging/Quantity

The AT24C11N-10SI-2.7-T is typically sold in reels or tubes, with each reel containing 2,000 units.

Specifications

  • Operating Voltage: 2.7V - 5.5V
  • Maximum Clock Frequency: 400 kHz
  • Write Cycle Time: 5 ms (maximum)
  • Data Retention: 100 years (minimum)
  • Endurance: 1 million write cycles (minimum)

Pin Configuration

The AT24C11N-10SI-2.7-T features an 8-pin SOIC package with the following pin configuration:

  1. A0: Address Input
  2. A1: Address Input
  3. A2: Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Random Access: The AT24C11N-10SI-2.7-T allows random access to any memory location, enabling efficient data retrieval.
  • Byte-Level Read and Write: It supports byte-level read and write operations, providing flexibility in data manipulation.
  • Hardware Write Protection: The WP pin can be used to protect the memory from accidental writes, enhancing data integrity.
  • Self-Timed Programming: The chip automatically manages internal write timing, simplifying the programming process.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • Compact size and low power consumption make it suitable for various portable electronic devices.
  • High endurance and long data retention period ensure reliable performance over an extended lifespan.
  • Easy integration with microcontrollers and other digital systems due to the standard I2C interface.

Disadvantages

  • Limited storage capacity compared to other EEPROM variants.
  • Relatively slower write cycle time may impact real-time applications.

Working Principles

The AT24C11N-10SI-2.7-T utilizes a floating-gate transistor structure to store data. When writing, an electric charge is applied to the floating gate, altering its electrical characteristics. This change determines whether the corresponding memory cell represents a logical "0" or "1". During reading, the stored charge is measured, allowing the retrieval of the stored data.

Detailed Application Field Plans

The AT24C11N-10SI-2.7-T finds applications in various fields, including:

  1. Embedded Systems: Used for storing configuration data, calibration values, and firmware updates in microcontroller-based systems.
  2. Industrial Automation: Enables parameter storage and data logging in industrial control systems.
  3. Consumer Electronics: Utilized in devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and settings.
  4. Automotive Electronics: Employed for storing critical data, such as mileage, fault codes, and user preferences, in automotive electronic control units (ECUs).
  5. Medical Devices: Used for storing patient information, device configurations, and calibration data in medical equipment.

Detailed and Complete Alternative Models

  1. AT24C01A: 1K-bit (128-byte) EEPROM with similar specifications and package options.
  2. AT24C21N-10SI-2.7-T: 2K-bit (256-byte) EEPROM with the same package and operating characteristics.
  3. AT24C64C-SSHM-T: 64K-bit (8KB) EEPROM with extended temperature range and smaller package options.

These alternative models offer different storage capacities and may have additional

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT24C11N-10SI-2.7-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT24C11N-10SI-2.7-T in technical solutions:

  1. Q: What is the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology.

  2. Q: What is the storage capacity of the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T has a storage capacity of 1 kilobit (128 bytes).

  3. Q: What is the operating voltage range for the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T operates within a voltage range of 2.7V to 5.5V.

  4. Q: What is the maximum clock frequency supported by the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T supports a maximum clock frequency of 400 kHz.

  5. Q: Can the AT24C11N-10SI-2.7-T be used for storing user data in embedded systems? A: Yes, the AT24C11N-10SI-2.7-T can be used to store user data in various embedded systems such as microcontrollers, sensors, and other electronic devices.

  6. Q: Does the AT24C11N-10SI-2.7-T support both read and write operations? A: Yes, the AT24C11N-10SI-2.7-T supports both read and write operations, allowing users to store and retrieve data as needed.

  7. Q: Is the AT24C11N-10SI-2.7-T compatible with I2C communication protocol? A: Yes, the AT24C11N-10SI-2.7-T is designed to be compatible with the I2C (Inter-Integrated Circuit) communication protocol.

  8. Q: Can multiple AT24C11N-10SI-2.7-T chips be connected together in a system? A: Yes, multiple AT24C11N-10SI-2.7-T chips can be connected together on the same I2C bus, allowing for increased storage capacity if required.

  9. Q: Does the AT24C11N-10SI-2.7-T have built-in security features? A: No, the AT24C11N-10SI-2.7-T does not have built-in security features. If security is required, additional measures need to be implemented in the system.

  10. Q: What are some typical applications of the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T is commonly used in applications such as smart cards, industrial control systems, medical devices, and automotive electronics where low-power, non-volatile memory storage is required.

Please note that these answers are general and may vary depending on specific requirements and use cases.