Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT24C08AN-10SC-1.8

AT24C08AN-10SC-1.8

Product Overview

Category

AT24C08AN-10SC-1.8 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The data stored in the chip can be erased and reprogrammed electronically.
  • Non-volatile: The stored data remains intact even when power is removed.
  • High storage capacity: The AT24C08AN-10SC-1.8 has a storage capacity of 8 kilobits (1 kilobyte).
  • Low power consumption: This chip operates at low power levels, making it suitable for battery-powered devices.
  • I2C interface: It uses the I2C (Inter-Integrated Circuit) protocol for communication with other devices.
  • Wide operating voltage range: The chip can operate within a voltage range of 1.7V to 5.5V.

Package

The AT24C08AN-10SC-1.8 comes in an 8-pin small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

The AT24C08AN-10SC-1.8 is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory capacity: 8 kilobits (1024 bytes)
  • Operating voltage: 1.7V to 5.5V
  • Maximum clock frequency: 400 kHz
  • Write cycle time: 5 ms (maximum)
  • Data retention: 100 years (minimum)

Detailed Pin Configuration

The AT24C08AN-10SC-1.8 has the following pin configuration:

  1. A0: Chip address input
  2. A1: Chip address input
  3. A2: Chip address input
  4. GND: Ground
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect
  8. VCC: Power supply voltage

Functional Features

  • Random access: The chip allows random access to any memory location, enabling efficient data retrieval.
  • Byte-level read/write: Data can be read from or written to the chip at the byte level, providing flexibility in data manipulation.
  • Hardware write protection: The WP pin can be used to protect the stored data from accidental modification.
  • Page write mode: This mode allows multiple bytes of data to be written in a single operation, improving write efficiency.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: The stored data remains intact even during power loss or device shutdown.
  • Compact form factor: The small package size makes it suitable for space-constrained applications.
  • Low power consumption: The chip operates at low power levels, extending battery life in portable devices.
  • High data retention: The stored data can be retained for up to 100 years, ensuring long-term reliability.

Disadvantages

  • Limited storage capacity: With a capacity of 8 kilobits, this chip may not be suitable for applications requiring large amounts of data storage.
  • Relatively slow write speed: The write cycle time of 5 ms may be considered slow for certain real-time applications.

Working Principles

The AT24C08AN-10SC-1.8 utilizes electrically controlled floating gate transistors to store and retrieve data. When data is written, the charge on the floating gate is altered, representing a binary value. During read operations, the charge on the floating gate is measured to determine the stored data.

Detailed Application Field Plans

The AT24C08AN-10SC-1.8 can be used in various applications, including but not limited to: - Microcontroller-based systems - Data logging devices - Industrial automation equipment - Automotive electronics - Smart home devices

Detailed and Complete Alternative Models

Some alternative models to the AT24C08AN-10SC-1.8 include: - AT24C01A: 1 kilobit EEPROM chip - AT24C16N: 16 kilobit EEPROM chip - AT24C256C: 256 kilobit EEPROM chip

These alternative models offer different storage capacities and may have varying specifications, allowing users to choose the most suitable option for their specific requirements.

In conclusion, the AT24C08AN-10SC-1.8 is an electrically erasable programmable read-only memory (EEPROM) chip that provides

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT24C08AN-10SC-1.8 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT24C08AN-10SC-1.8 in technical solutions:

Q1: What is AT24C08AN-10SC-1.8? A1: AT24C08AN-10SC-1.8 is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 8 kilobits (1024 bytes). It operates at a voltage of 1.8V.

Q2: What are some common applications of AT24C08AN-10SC-1.8? A2: AT24C08AN-10SC-1.8 is commonly used in various technical solutions such as data storage in microcontrollers, smart cards, industrial control systems, and other electronic devices that require non-volatile memory.

Q3: What is the maximum clock frequency supported by AT24C08AN-10SC-1.8? A3: The maximum clock frequency supported by AT24C08AN-10SC-1.8 is 400 kHz.

Q4: How many write cycles can AT24C08AN-10SC-1.8 endure? A4: AT24C08AN-10SC-1.8 can endure up to 1 million write cycles.

Q5: Can AT24C08AN-10SC-1.8 operate at higher voltages than 1.8V? A5: No, AT24C08AN-10SC-1.8 is specifically designed to operate at a voltage of 1.8V. Operating it at higher voltages may damage the chip.

Q6: Does AT24C08AN-10SC-1.8 have any built-in security features? A6: No, AT24C08AN-10SC-1.8 does not have any built-in security features. It is a standard EEPROM chip without encryption or authentication capabilities.

Q7: What is the typical data retention time of AT24C08AN-10SC-1.8? A7: The typical data retention time of AT24C08AN-10SC-1.8 is 100 years.

Q8: Can AT24C08AN-10SC-1.8 be used in automotive applications? A8: Yes, AT24C08AN-10SC-1.8 is suitable for automotive applications as it can operate within the specified temperature range (-40°C to +85°C) and has good resistance to vibrations and shocks.

Q9: Is AT24C08AN-10SC-1.8 compatible with I2C communication protocol? A9: Yes, AT24C08AN-10SC-1.8 is fully compatible with the I2C (Inter-Integrated Circuit) communication protocol, making it easy to interface with microcontrollers and other devices.

Q10: Can AT24C08AN-10SC-1.8 be soldered onto a PCB? A10: Yes, AT24C08AN-10SC-1.8 comes in a small surface-mount package (SOIC) that can be easily soldered onto a PCB using standard soldering techniques.

Please note that these answers are based on general knowledge about AT24C08AN-10SC-1.8 and may vary depending on specific datasheet specifications and application requirements.