AT24C08AN-10SC

Product Overview

Category

AT24C08AN-10SC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

• Electrically erasable: The stored data can be erased and reprogrammed electronically.
• Non-volatile: The data remains intact even when power is removed.
• High storage capacity: AT24C08AN-10SC has a storage capacity of 8 kilobits (1 kilobyte).
• Low power consumption: It operates on low power supply voltages, making it suitable for battery-powered devices.

Package

AT24C08AN-10SC is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

AT24C08AN-10SC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Memory capacity: 8 kilobits (1024 bytes)
• Operating voltage: 2.7V to 5.5V
• Operating temperature range: -40°C to +85°C
• Write cycle endurance: 1 million cycles
• Data retention: 100 years

Detailed Pin Configuration

AT24C08AN-10SC has a total of 8 pins, each serving a specific function:

1. A0: Address input pin 0
2. A1: Address input pin 1
3. A2: Address input pin 2
4. GND: Ground pin
5. SDA: Serial data input/output pin
6. SCL: Serial clock input pin
7. WP: Write protect pin
8. VCC: Power supply pin

Functional Features

• Random access: Allows reading and writing of specific memory locations.
• Byte-level operations: Supports individual byte read and write operations.
• I2C interface: Uses the I2C protocol for communication with other devices.
• Hardware write protection: The WP pin can be used to protect the memory from accidental writes.

Advantages and Disadvantages

Advantages

• Non-volatile storage: Data remains intact even during power loss.
• High endurance: Can withstand a large number of write cycles.
• Compact form factor: Suitable for space-constrained applications.
• Low power consumption: Ideal for battery-powered devices.

Disadvantages

• Limited storage capacity: 8 kilobits may not be sufficient for certain applications requiring larger memory sizes.
• Relatively slower write speed compared to other memory technologies.

Working Principles

AT24C08AN-10SC utilizes an electrically erasable floating-gate transistor technology. It stores data by trapping charges in the floating gate, which can be later removed or added using electrical signals. The stored charge determines the logic state of each memory cell, allowing for non-volatile data storage.

Detailed Application Field Plans

AT24C08AN-10SC finds applications in various fields, including but not limited to: 1. Embedded systems: Used for storing configuration data and firmware updates in microcontrollers. 2. Consumer electronics: Employed in devices like smart TVs, set-top boxes, and digital cameras for storing user preferences and settings. 3. Industrial automation: Utilized for data logging and parameter storage in programmable logic controllers (PLCs). 4. Automotive electronics: Integrated into vehicle control units for storing critical data such as calibration values and fault codes.

Detailed and Complete Alternative Models

Some alternative models to AT24C08AN-10SC include: 1. AT24C01A: 1 kilobit EEPROM chip. 2. AT24C16N: 16 kilobit EEPROM chip. 3. AT24C256C: 256 kilobit EEPROM chip.

These alternatives offer different storage capacities to cater to diverse application requirements.

Word count: 550 words