AT24C04AN-10SC-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The AT24C04AN-10SC-2.7 is available in a small outline integrated circuit (SOIC) package.
The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact form factor.
The AT24C04AN-10SC-2.7 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.
The AT24C04AN-10SC-2.7 has a total of 8 pins, which are assigned specific functions:
The AT24C04AN-10SC-2.7 operates based on the principles of EEPROM technology. It utilizes electrically controlled floating gate transistors to store and retrieve data. When data is written, charges are trapped in the floating gate, altering the transistor's behavior. These charges can be removed during the erasing process, allowing new data to be written.
The AT24C04AN-10SC-2.7 finds applications in various fields, including:
These alternative models provide options with varying capacities to suit different application requirements.
In conclusion, the AT24C04AN-10SC-2.7 is a compact and reliable EEPROM chip that offers non-volatile data storage
Sure! Here are 10 common questions and answers related to the application of AT24C04AN-10SC-2.7 in technical solutions:
Q: What is the AT24C04AN-10SC-2.7? A: The AT24C04AN-10SC-2.7 is a 4K-bit serial electrically erasable programmable read-only memory (EEPROM) integrated circuit.
Q: What is the operating voltage range of the AT24C04AN-10SC-2.7? A: The AT24C04AN-10SC-2.7 operates within a voltage range of 2.7V to 5.5V.
Q: How much data can the AT24C04AN-10SC-2.7 store? A: The AT24C04AN-10SC-2.7 can store up to 512 bytes of data.
Q: What is the maximum clock frequency supported by the AT24C04AN-10SC-2.7? A: The AT24C04AN-10SC-2.7 supports a maximum clock frequency of 400 kHz.
Q: Can the AT24C04AN-10SC-2.7 be used for both reading and writing data? A: Yes, the AT24C04AN-10SC-2.7 supports both read and write operations.
Q: Is the AT24C04AN-10SC-2.7 compatible with I2C communication protocol? A: Yes, the AT24C04AN-10SC-2.7 uses the I2C (Inter-Integrated Circuit) communication protocol.
Q: Can multiple AT24C04AN-10SC-2.7 devices be connected together on the same I2C bus? A: Yes, multiple AT24C04AN-10SC-2.7 devices can be connected together on the same I2C bus using different device addresses.
Q: What is the typical write endurance of the AT24C04AN-10SC-2.7? A: The AT24C04AN-10SC-2.7 has a typical write endurance of 1 million write cycles.
Q: Does the AT24C04AN-10SC-2.7 have built-in write protection features? A: Yes, the AT24C04AN-10SC-2.7 provides hardware and software write protection options.
Q: Can the AT24C04AN-10SC-2.7 operate in harsh environmental conditions? A: Yes, the AT24C04AN-10SC-2.7 is designed to operate in a wide temperature range (-40°C to +85°C) and is suitable for various industrial applications.
Please note that these answers are based on general information about the AT24C04AN-10SC-2.7 and may vary depending on specific implementation details and requirements.