AT24C02N-10SC-2.5 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used for storing and retrieving digital information in various electronic devices.
The AT24C02N-10SC-2.5 chip is available in an 8-pin small outline integrated circuit (SOIC) package.
The essence of this product lies in its ability to provide non-volatile memory storage in a compact and efficient form.
The AT24C02N-10SC-2.5 chip is typically packaged in reels or tubes, with each reel containing 2,500 units.
The AT24C02N-10SC-2.5 chip has the following pin configuration:
The AT24C02N-10SC-2.5 chip utilizes electrically erasable programmable read-only memory (EEPROM) technology. It consists of a grid of memory cells, each capable of storing one bit of information. These cells can be individually addressed and written to or read from using an I2C interface. The stored data is retained even when power is removed, making it non-volatile.
The AT24C02N-10SC-2.5 chip finds application in various fields, including:
These alternative models offer different storage capacities
Sure! Here are 10 common questions and answers related to the application of AT24C02N-10SC-2.5 in technical solutions:
Q: What is the AT24C02N-10SC-2.5? A: The AT24C02N-10SC-2.5 is a 2-wire serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 2 kilobits (256 bytes).
Q: What are the typical applications of AT24C02N-10SC-2.5? A: The AT24C02N-10SC-2.5 is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and other embedded systems.
Q: How does the AT24C02N-10SC-2.5 communicate with other devices? A: The AT24C02N-10SC-2.5 uses a 2-wire I2C (Inter-Integrated Circuit) interface for communication, which requires only two wires (SDA and SCL) to connect with other devices.
Q: What is the operating voltage range of AT24C02N-10SC-2.5? A: The AT24C02N-10SC-2.5 operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of electronic systems.
Q: Can the AT24C02N-10SC-2.5 be easily integrated into existing circuits? A: Yes, the AT24C02N-10SC-2.5 comes in an industry-standard 8-pin SOIC (Small Outline Integrated Circuit) package, which makes it easy to integrate into existing circuit boards.
Q: How much data can be stored in the AT24C02N-10SC-2.5? A: The AT24C02N-10SC-2.5 has a storage capacity of 2 kilobits, which is equivalent to 256 bytes or 2048 bits.
Q: Is the data stored in the AT24C02N-10SC-2.5 non-volatile? A: Yes, the data stored in the AT24C02N-10SC-2.5 is non-volatile, meaning it retains the stored information even when power is removed.
Q: What is the maximum clock frequency supported by the AT24C02N-10SC-2.5? A: The AT24C02N-10SC-2.5 supports a maximum clock frequency of 400 kHz for I2C communication.
Q: Can the AT24C02N-10SC-2.5 withstand harsh environmental conditions? A: The AT24C02N-10SC-2.5 is designed to operate within an extended temperature range of -40°C to +85°C, making it suitable for various environments.
Q: Are there any special considerations for programming and erasing data in the AT24C02N-10SC-2.5? A: Yes, the AT24C02N-10SC-2.5 requires specific write and erase operations, following the guidelines provided in the datasheet, to ensure proper functionality and data integrity.
Please note that these answers are general and may vary depending on the specific requirements and use cases of the AT24C02N-10SC-2.5 in different technical solutions.