Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT24C01A-10SI

AT24C01A-10SI

Product Overview

Category

AT24C01A-10SI belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The stored data can be erased and reprogrammed electronically.
  • Non-volatile: The data remains intact even when power is removed.
  • Small package size: The chip is available in a compact 8-pin SOIC package.
  • Low power consumption: It operates on low power supply voltages, making it suitable for battery-powered devices.

Package and Quantity

The AT24C01A-10SI chip is packaged in an 8-pin Small Outline Integrated Circuit (SOIC) package. It is typically sold in reels or tubes containing multiple units.

Specifications

  • Memory capacity: 1 kilobit (128 bytes)
  • Operating voltage range: 2.7V to 5.5V
  • Maximum clock frequency: 400 kHz
  • Write cycle time: 5 ms (maximum)
  • Data retention: 100 years (minimum)

Pin Configuration

The AT24C01A-10SI chip has the following pin configuration:

```


| | | 1 8 | | | | 2 7 | | | | 3 6 | | | | 4 5 | |___________| ```

Pin Description: 1. A0: Address input bit 0 2. A1: Address input bit 1 3. A2: Address input bit 2 4. GND: Ground 5. SDA: Serial data input/output 6. SCL: Serial clock input 7. WP: Write protect 8. VCC: Power supply voltage

Functional Features

  • Random access: Allows reading and writing of individual bytes within the memory array.
  • Byte write and page write modes: Supports both single-byte and multiple-byte write operations.
  • Hardware write protection: The WP pin can be used to protect the memory from accidental writes.
  • I2C interface: The chip communicates using the widely adopted I2C protocol.

Advantages and Disadvantages

Advantages: - Compact size and low power consumption make it suitable for portable devices. - Non-volatile memory ensures data integrity even during power loss. - Easy integration with microcontrollers and other electronic systems. - High data retention period ensures long-term storage reliability.

Disadvantages: - Limited memory capacity compared to other EEPROM chips. - Relatively slower write cycle time may impact performance in certain applications. - Requires external components (microcontroller, I2C bus) for full functionality.

Working Principles

The AT24C01A-10SI chip utilizes a floating-gate transistor structure to store data. When a byte is written, an electric charge is trapped in the floating gate, representing a logical "1." Erasing the data involves removing the charge from the floating gate, resetting the bit to logical "0." The chip's internal circuitry manages the read, write, and erase operations based on the control signals received through the I2C interface.

Detailed Application Field Plans

The AT24C01A-10SI chip finds applications in various fields, including:

  1. Consumer Electronics: Used for storing configuration settings, user preferences, and firmware updates in devices like smart TVs, set-top boxes, and digital cameras.
  2. Automotive: Employed in electronic control units (ECUs) for storing calibration data, fault codes, and vehicle-specific settings.
  3. Industrial Automation: Used in programmable logic controllers (PLCs) to store program code, configuration data, and historical logs.
  4. Medical Devices: Utilized for storing patient data, device configurations, and firmware updates in medical equipment like infusion pumps and patient monitors.

Detailed and Complete Alternative Models

  1. AT24C02: Similar to AT24C01A-10SI but with double the memory capacity (2 kilobits).
  2. AT24C04: EEPROM chip with 4 kilobits of memory capacity.
  3. AT24C08: Offers 8 kilobits of memory capacity, suitable for applications requiring more storage space.
  4. AT24C16: Provides 16 kilobits of memory, ideal for larger data storage requirements.

These alternative models offer increased memory capacity while maintaining similar functionality and compatibility with the I2C interface.

In conclusion, the AT24C01A-10SI is a compact and versatile EEPROM chip that provides non-volatile data storage capabilities. Its small package size, low power consumption

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT24C01A-10SI in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT24C01A-10SI in technical solutions:

  1. Q: What is AT24C01A-10SI? A: AT24C01A-10SI is a 1K-bit electrically erasable programmable read-only memory (EEPROM) chip manufactured by Microchip Technology.

  2. Q: What is the operating voltage range for AT24C01A-10SI? A: The operating voltage range for AT24C01A-10SI is typically between 1.7V and 5.5V.

  3. Q: How much data can be stored in AT24C01A-10SI? A: AT24C01A-10SI has a storage capacity of 1 kilobit, which is equivalent to 128 bytes or 1024 bits.

  4. Q: What is the maximum clock frequency supported by AT24C01A-10SI? A: The maximum clock frequency supported by AT24C01A-10SI is 400 kHz.

  5. Q: Can AT24C01A-10SI be used for both read and write operations? A: Yes, AT24C01A-10SI supports both read and write operations, allowing data to be written to and read from the chip.

  6. Q: Is AT24C01A-10SI suitable for low-power applications? A: Yes, AT24C01A-10SI is designed for low-power consumption, making it suitable for battery-powered or energy-efficient devices.

  7. Q: Does AT24C01A-10SI have any built-in security features? A: No, AT24C01A-10SI does not have any built-in security features. It is a standard EEPROM chip without encryption or authentication capabilities.

  8. Q: Can AT24C01A-10SI operate in extreme temperature conditions? A: Yes, AT24C01A-10SI has an extended temperature range and can operate reliably in temperatures ranging from -40°C to +85°C.

  9. Q: What interface does AT24C01A-10SI use for communication? A: AT24C01A-10SI uses the I2C (Inter-Integrated Circuit) interface for communication with other devices.

  10. Q: Are there any limitations on the number of write cycles for AT24C01A-10SI? A: Yes, AT24C01A-10SI has a specified endurance of 1 million write cycles. After this limit is reached, the data retention may become unreliable.

Please note that these answers are general and may vary depending on the specific implementation and usage scenario.