Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
93LC56XT/SN

93LC56XT/SN

Product Overview

Category

The 93LC56XT/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, automotive electronics, and consumer electronics.

Characteristics

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package

The 93LC56XT/SN is typically available in a small outline integrated circuit (SOIC) package.

Essence

This EEPROM chip is essential for storing critical data in electronic systems, ensuring that the information is retained even when the power is turned off.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory Size: 2 Kbits
  • Interface: Serial I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 125°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 93LC56XT/SN typically has 8 pins, including power supply, ground, serial data input/output, and control pins. The detailed pin configuration can be found in the datasheet provided by the manufacturer.

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Partial Page Writes Allowed
  • Hardware Write Protection
  • Sequential Reads

Advantages

  • Low power consumption
  • Compact size
  • High reliability and endurance
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93LC56XT/SN operates by using an electric field to store and erase data. When data is written to the chip, it is stored in the form of electrical charges within the memory cells. These charges can be selectively erased and reprogrammed, allowing for non-volatile data storage.

Detailed Application Field Plans

The 93LC56XT/SN is widely used in applications requiring non-volatile memory, such as: - Microcontroller firmware storage - Parameter storage in automotive electronics - Configuration storage in consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the 93LC56XT/SN include: - 24LC256 - 25AA256 - AT24C256

These alternatives offer similar functionality and are compatible with many existing designs that use EEPROM memory.

In conclusion, the 93LC56XT/SN is a versatile EEPROM chip suitable for a wide range of electronic applications, offering reliable non-volatile data storage in a compact form factor.

[Word Count: 410]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 93LC56XT/SN in technische oplossingen

  1. What is the 93LC56XT/SN?

    • The 93LC56XT/SN is a serial electrically erasable programmable read-only memory (EEPROM) chip.
  2. What is the storage capacity of the 93LC56XT/SN?

    • The 93LC56XT/SN has a storage capacity of 2 Kbits.
  3. What is the operating voltage range of the 93LC56XT/SN?

    • The operating voltage range of the 93LC56XT/SN is 2.5V to 5.5V.
  4. What is the maximum clock frequency supported by the 93LC56XT/SN?

    • The 93LC56XT/SN supports a maximum clock frequency of 2 MHz.
  5. What are the typical applications of the 93LC56XT/SN?

    • Typical applications of the 93LC56XT/SN include storing configuration data, serial number storage, and small parameter storage in various technical solutions.
  6. Does the 93LC56XT/SN support sequential read operation?

    • Yes, the 93LC56XT/SN supports sequential read operation.
  7. What is the write endurance of the 93LC56XT/SN?

    • The 93LC56XT/SN has a minimum write endurance of 1,000,000 cycles.
  8. Is the 93LC56XT/SN compatible with SPI interface?

    • Yes, the 93LC56XT/SN is compatible with the Serial Peripheral Interface (SPI).
  9. What is the package type of the 93LC56XT/SN?

    • The 93LC56XT/SN is available in a 8-pin SOIC package.
  10. Are there any special handling considerations for the 93LC56XT/SN during assembly?

    • It is recommended to follow standard ESD (electrostatic discharge) handling procedures when assembling the 93LC56XT/SN into technical solutions.