Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
93LC56BT-I/SN

93LC56BT-I/SN

Product Overview

Category

The 93LC56BT-I/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, automotive electronics, and consumer electronics.

Characteristics

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package

The 93LC56BT-I/SN is typically available in a surface-mount package.

Essence

The essence of this product lies in its ability to store and retain data without requiring a constant power supply.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory Size: 2 Kbits
  • Interface: SPI
  • Operating Voltage: 2.5V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: 200 years

Detailed Pin Configuration

The 93LC56BT-I/SN typically features an 8-pin configuration, including power supply pins, data input/output pins, and control pins.

Functional Features

  • Byte and Page Write
  • Self-timed Erase and Write Cycles
  • Enhanced ESD/Latch-Up Protection
  • Sequential Read Operation

Advantages

  • Compact size
  • Low power consumption
  • High reliability and durability
  • Ease of integration into various electronic systems

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory options

Working Principles

The 93LC56BT-I/SN operates by using electrical signals to modify the state of individual memory cells, allowing for data to be written, read, and erased as needed.

Detailed Application Field Plans

This EEPROM chip is widely used in applications requiring non-volatile memory, such as: - Embedded systems - Industrial automation - Automotive control units - Smart meters - IoT devices

Detailed and Complete Alternative Models

Some alternative models to the 93LC56BT-I/SN include: - 24C02: A similar EEPROM chip with a different interface - AT24C256: Offers higher storage capacity - CAT24C256: Provides enhanced endurance and reliability

In conclusion, the 93LC56BT-I/SN is a versatile EEPROM chip that offers reliable non-volatile memory storage for a wide range of electronic applications.

[Word Count: 334]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 93LC56BT-I/SN in technische oplossingen

  1. What is the maximum clock frequency for 93LC56BT-I/SN?

    • The maximum clock frequency for 93LC56BT-I/SN is 2 MHz.
  2. What is the operating voltage range for 93LC56BT-I/SN?

    • The operating voltage range for 93LC56BT-I/SN is 2.5V to 5.5V.
  3. What is the typical write cycle time for 93LC56BT-I/SN?

    • The typical write cycle time for 93LC56BT-I/SN is 5 ms.
  4. Can 93LC56BT-I/SN be used in automotive applications?

    • Yes, 93LC56BT-I/SN is suitable for automotive applications.
  5. What is the endurance of 93LC56BT-I/SN?

    • The endurance of 93LC56BT-I/SN is 1,000,000 erase/write cycles.
  6. Does 93LC56BT-I/SN support sequential read operation?

    • Yes, 93LC56BT-I/SN supports sequential read operation.
  7. What is the temperature range for 93LC56BT-I/SN?

    • The temperature range for 93LC56BT-I/SN is -40°C to +125°C.
  8. Is 93LC56BT-I/SN RoHS compliant?

    • Yes, 93LC56BT-I/SN is RoHS compliant.
  9. What is the package type for 93LC56BT-I/SN?

    • 93LC56BT-I/SN is available in an 8-pin SOIC package.
  10. Can 93LC56BT-I/SN be used in battery-powered devices?

    • Yes, 93LC56BT-I/SN can be used in battery-powered devices due to its low power consumption.