Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
93LC56BT-I/MNY
Details bekijken DataSheets

93LC56BT-I/MNY

Product Overview

Category:

The 93LC56BT-I/MNY belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use:

It is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, automotive electronics, and consumer electronics.

Characteristics:

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package:

The 93LC56BT-I/MNY is typically available in a surface-mount package, offering ease of integration into circuit boards.

Essence:

This EEPROM chip provides a reliable and efficient means of storing data in electronic systems.

Packaging/Quantity:

The 93LC56BT-I/MNY is usually supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 2 Kbits
  • Interface: Serial I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 93LC56BT-I/MNY features a standard 8-pin configuration, including power supply, ground, and serial communication pins.

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Partial Page Writes Allowed
  • Hardware Write Protection

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Small footprint
  • High reliability
  • Flexible write modes

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93LC56BT-I/MNY operates by using an electric field to trap electrons in a floating gate, allowing for non-volatile data storage. The data can be written and erased electrically, providing a reliable means of data retention.

Detailed Application Field Plans

The 93LC56BT-I/MNY is widely used in applications requiring non-volatile memory, including: - Microcontroller-based systems - Automotive control units - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

  • 24LC256
  • AT24C02
  • CAT24C02

In conclusion, the 93LC56BT-I/MNY offers a reliable and efficient solution for non-volatile data storage in various electronic applications, making it a popular choice among designers and engineers.

[Word count: 394]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 93LC56BT-I/MNY in technische oplossingen

  1. What is the 93LC56BT-I/MNY used for?

    • The 93LC56BT-I/MNY is a serial electrically erasable programmable read-only memory (EEPROM) that is commonly used for storing small amounts of data in various technical solutions.

  2. What is the storage capacity of the 93LC56BT-I/MNY?

    • The 93LC56BT-I/MNY has a storage capacity of 2 Kbits, organized as 256 x 8.

  3. What are the typical applications of the 93LC56BT-I/MNY?

    • Typical applications include storing configuration data, calibration constants, and other small amounts of non-volatile data in microcontroller-based systems.

  4. What is the interface protocol for accessing the 93LC56BT-I/MNY?

    • The 93LC56BT-I/MNY uses a simple 3-wire serial interface (clock, data in, data out) for communication with microcontrollers or other digital devices.

  5. What is the operating voltage range of the 93LC56BT-I/MNY?

    • The 93LC56BT-I/MNY operates within a voltage range of 2.5V to 5.5V.

  6. Can the 93LC56BT-I/MNY be reprogrammed?

    • Yes, the 93LC56BT-I/MNY supports reprogramming, allowing for updates or changes to the stored data.

  7. What are the typical clock frequencies used with the 93LC56BT-I/MNY?

    • Clock frequencies typically range from DC to 2 MHz for efficient data transfer.

  8. Does the 93LC56BT-I/MNY have built-in security features?

    • The 93LC56BT-I/MNY does not have built-in security features and relies on external measures for data protection.

  9. Is the 93LC56BT-I/MNY suitable for automotive applications?

    • Yes, the 93LC56BT-I/MNY is suitable for automotive applications due to its robustness and reliability in harsh environments.

  10. What are the temperature specifications for the 93LC56BT-I/MNY?

    • The 93LC56BT-I/MNY is designed to operate within a temperature range of -40°C to 125°C, making it suitable for a wide range of industrial and automotive applications.