Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
93C66AT-I/MS

93C66AT-I/MS

Product Overview

Category

The 93C66AT-I/MS belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices such as automotive, industrial, and consumer applications.

Characteristics

  • Non-volatile memory
  • Low power consumption
  • Small form factor
  • High reliability

Package

The 93C66AT-I/MS is typically available in a surface-mount package.

Essence

This EEPROM chip provides reliable and non-volatile data storage for electronic devices.

Packaging/Quantity

The 93C66AT-I/MS is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 4 Kbits
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.5V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 93C66AT-I/MS typically has 8 pins, including power supply, ground, and serial communication interface pins. The detailed pin configuration can be found in the datasheet provided by the manufacturer.

Functional Features

  • Serial data input/output
  • Chip select for device addressing
  • Write enable for programming
  • Sequential read operation

Advantages

  • Low power consumption
  • Small form factor
  • High reliability and endurance
  • Ease of integration into electronic designs

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93C66AT-I/MS utilizes an electrically erasable floating gate technology to store and retrieve data. It operates using a serial communication interface, allowing for easy integration into various electronic systems.

Detailed Application Field Plans

The 93C66AT-I/MS is widely used in automotive electronics for storing critical vehicle data, in industrial control systems for parameter storage, and in consumer electronics for firmware and configuration storage.

Detailed and Complete Alternative Models

  • 93C46AT-I/MS
  • 93C56AT-I/MS
  • 93C86AT-I/MS

These alternative models offer similar functionality with varying memory sizes to suit different application requirements.

In conclusion, the 93C66AT-I/MS EEPROM chip offers reliable non-volatile data storage with low power consumption and high endurance, making it suitable for a wide range of electronic applications.

[Word Count: 366]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 93C66AT-I/MS in technische oplossingen

  1. What is the maximum clock frequency for 93C66AT-I/MS?
    - The maximum clock frequency for 93C66AT-I/MS is 3MHz.

  2. What is the operating voltage range for 93C66AT-I/MS?
    - The operating voltage range for 93C66AT-I/MS is 4.5V to 5.5V.

  3. Can 93C66AT-I/MS be used in automotive applications?
    - Yes, 93C66AT-I/MS is suitable for automotive applications.

  4. What is the typical write cycle time for 93C66AT-I/MS?
    - The typical write cycle time for 93C66AT-I/MS is 5ms.

  5. Is 93C66AT-I/MS compatible with SPI interface?
    - Yes, 93C66AT-I/MS is compatible with SPI interface.

  6. What is the temperature range for 93C66AT-I/MS?
    - The temperature range for 93C66AT-I/MS is -40°C to 125°C.

  7. Can 93C66AT-I/MS be used in industrial control systems?
    - Yes, 93C66AT-I/MS is suitable for use in industrial control systems.

  8. What is the package type for 93C66AT-I/MS?
    - 93C66AT-I/MS is available in an 8-pin SOIC package.

  9. Does 93C66AT-I/MS support partial page writes?
    - No, 93C66AT-I/MS does not support partial page writes.

  10. What is the endurance rating for 93C66AT-I/MS?
    - The endurance rating for 93C66AT-I/MS is 1,000,000 write cycles.