24C01C-I/P

Product Overview

Category

The 24C01C-I/P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

• Non-volatile: The 24C01C-I/P retains stored data even when power is removed.
• Electrically erasable: The chip allows for easy modification and erasure of stored data.
• High density: It offers a storage capacity of 1 kilobit (128 bytes).
• Low power consumption: The chip operates at low voltage levels, making it energy-efficient.
• Fast write and read speeds: The 24C01C-I/P enables quick data transfer.

Package

The 24C01C-I/P is available in an 8-pin DIP (Dual Inline Package) format.

Essence

The essence of the 24C01C-I/P lies in its ability to provide reliable and non-volatile data storage in electronic devices.

Packaging/Quantity

The chip is typically sold in reels or tubes, with each reel containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Storage Capacity: 1 kilobit (128 bytes)
• Operating Voltage: 2.5V to 5.5V
• Write Time: 5 ms (maximum)
• Read Time: 1 ms (maximum)
• Data Retention: 100 years (minimum)

Detailed Pin Configuration

The 24C01C-I/P has the following pin configuration:

1. A0: Address Input
2. A1: Address Input
3. A2: Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect
8. VCC: Power Supply

Functional Features

• Random Access: The chip allows for random access to any memory location, enabling efficient data retrieval.
• Sequential Read and Write: It supports sequential read and write operations, facilitating easy data manipulation.
• Hardware Write Protection: The WP pin can be used to protect the stored data from accidental modification.
• I2C Interface: The 24C01C-I/P utilizes the I2C (Inter-Integrated Circuit) protocol for communication with other devices.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data retention even during power loss.
• High-density storage capacity in a compact package.
• Low power consumption prolongs battery life in portable devices.
• Fast read and write speeds enhance overall system performance.
• Easy integration with microcontrollers and other electronic components.

Disadvantages

• Limited storage capacity compared to other memory technologies.
• Relatively slower write times compared to some alternative models.
• Vulnerable to electromagnetic interference (EMI) due to its non-shielded package.

Working Principles

The 24C01C-I/P utilizes an array of floating-gate transistors to store data. When data is written, an electric charge is trapped in the floating gate, altering the transistor's behavior. This charge can be removed during the erasure process, allowing new data to be written. The chip communicates with the host device using the I2C protocol, enabling seamless data transfer.

Detailed Application Field Plans

The 24C01C-I/P finds applications in various fields, including:

1. Automotive Electronics: Used for storing vehicle configuration data, mileage records, and fault codes.
2. Industrial Automation: Employed in programmable logic controllers (PLCs) for storing configuration parameters and program data.
3. Consumer Electronics: Integrated into devices like smart TVs, set-top boxes, and gaming consoles for firmware storage and user settings.
4. Medical Devices: Utilized for storing patient data, device configurations, and calibration information in medical equipment.

Detailed and Complete Alternative Models

1. 24C02C-I/P: Similar to the 24C01C-I/P but with double the storage capacity (2 kilobits).
2. 24C04C-I/P: Offers four times the storage capacity of the 24C01C-I/P (4 kilobits).
3. 24C08C-I/P: Provides eight times the storage capacity of the 24C01C-I/P (8 kilobits).

These alternative models offer increased storage capacity while maintaining similar characteristics and functionality to the 24C01C-I/P.

In conclusion, the 24C01C-I/P is a versatile EEPROM chip that offers non-volatile data storage, high density, and low power consumption. Its fast read and write speeds, along with its I2C interface, make it