Meixin Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX8902AATA/V+T
Details bekijken DataSheets

MAX8902AATA/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Small Package Size
  • Package: 8-pin Thin SOT23
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 200mA
  • Quiescent Current: 20µA
  • Dropout Voltage: 120mV at 100mA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX8902AATA/V+T IC has the following pin configuration:

  1. EN (Enable): Enable Pin
  2. GND (Ground): Ground Connection
  3. FB (Feedback): Feedback Pin for Output Voltage Regulation
  4. VOUT (Output Voltage): Output Voltage Pin
  5. VIN (Input Voltage): Input Voltage Pin
  6. BYP (Bypass): Bypass Capacitor Connection
  7. PG (Power Good): Power Good Indicator
  8. LX (Switching Node): Switching Node Connection

Functional Features

  • High Efficiency: The MAX8902AATA/V+T offers high efficiency power conversion, minimizing energy loss.
  • Low Quiescent Current: With a quiescent current of only 20µA, it ensures minimal power consumption during standby or low-load conditions.
  • Small Package Size: The 8-pin Thin SOT23 package allows for compact designs in space-constrained applications.

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Low quiescent current for reduced power consumption
  • Small package size for space-constrained applications

Disadvantages

  • Limited maximum output current of 200mA

Working Principles

The MAX8902AATA/V+T is a voltage regulator IC that takes an input voltage in the range of 2.7V to 5.5V and provides a regulated output voltage in the range of 1.2V to 3.6V. It achieves this by utilizing a switching regulator architecture, which allows for high efficiency power conversion.

The enable pin (EN) controls the operation of the regulator. When the EN pin is high, the regulator is enabled and actively regulates the output voltage. Conversely, when the EN pin is low, the regulator enters a low-power standby mode, reducing quiescent current.

The feedback pin (FB) is used to set the desired output voltage. By connecting an external resistor divider network between the output voltage pin (VOUT) and the FB pin, the output voltage can be precisely adjusted.

Detailed Application Field Plans

The MAX8902AATA/V+T is commonly used in various battery-powered portable devices, such as smartphones, tablets, and wearable devices. Its small package size and low quiescent current make it ideal for applications where space and power efficiency are crucial.

Additionally, it finds applications in IoT devices, medical devices, and other portable electronics that require efficient power management solutions.

Detailed and Complete Alternative Models

  • MAX8902BATA/V+T: Similar specifications and features, but with a different package (8-pin TDFN)
  • MAX8902CATA/V+T: Higher maximum output current of 500mA, suitable for applications requiring higher power delivery

These alternative models provide similar functionality to the MAX8902AATA/V+T, catering to different design requirements and preferences.

Word count: 420 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX8902AATA/V+T in technische oplossingen

  1. Question: What is the input voltage range of MAX8902AATA/V+T?
    Answer: The input voltage range of MAX8902AATA/V+T is 2.5V to 5.5V.

  2. Question: What is the typical output current of MAX8902AATA/V+T?
    Answer: The typical output current of MAX8902AATA/V+T is 200mA.

  3. Question: Can MAX8902AATA/V+T be used in battery-powered applications?
    Answer: Yes, MAX8902AATA/V+T is suitable for battery-powered applications.

  4. Question: What is the quiescent current of MAX8902AATA/V+T?
    Answer: The quiescent current of MAX8902AATA/V+T is typically 30µA.

  5. Question: Is MAX8902AATA/V+T suitable for low-power designs?
    Answer: Yes, MAX8902AATA/V+T is well-suited for low-power designs.

  6. Question: Does MAX8902AATA/V+T have built-in overcurrent protection?
    Answer: Yes, MAX8902AATA/V+T features built-in overcurrent protection.

  7. Question: What is the operating temperature range of MAX8902AATA/V+T?
    Answer: The operating temperature range of MAX8902AATA/V+T is -40°C to +85°C.

  8. Question: Can MAX8902AATA/V+T be used in automotive applications?
    Answer: Yes, MAX8902AATA/V+T is suitable for automotive applications.

  9. Question: Does MAX8902AATA/V+T require external compensation?
    Answer: No, MAX8902AATA/V+T does not require external compensation.

  10. Question: What package type is MAX8902AATA/V+T available in?
    Answer: MAX8902AATA/V+T is available in a 8-pin TDFN package.