Meixin Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX8599ETE+T
Details bekijken DataSheets

MAX8599ETE+T

Product Overview

Category

MAX8599ETE+T belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

The MAX8599ETE+T is available in a small 16-pin TQFN package.

Essence

The essence of MAX8599ETE+T lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

The MAX8599ETE+T is typically packaged in reels, with 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Quiescent Current: 30µA (typical)
  • Switching Frequency: 1MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS/TR: Soft-start/Tracking pin
  6. PGND: Power ground pin
  7. LX: Inductor connection pin
  8. LX: Inductor connection pin
  9. LX: Inductor connection pin
  10. LX: Inductor connection pin
  11. LX: Inductor connection pin
  12. LX: Inductor connection pin
  13. LX: Inductor connection pin
  14. LX: Inductor connection pin
  15. LX: Inductor connection pin
  16. LX: Inductor connection pin

Functional Features

  • Integrated synchronous step-down converter
  • Adjustable output voltage through external resistors
  • Soft-start and tracking functions for controlled startup
  • Overcurrent protection to prevent damage to the IC and load
  • Thermal shutdown protection to prevent overheating

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable output voltage provides flexibility in different applications
  • Overcurrent and thermal shutdown protection enhance reliability

Disadvantages

  • Limited output voltage range may not be suitable for certain applications requiring higher voltages
  • Requires external components for proper operation, increasing complexity

Working Principles

The MAX8599ETE+T is a synchronous step-down converter that uses pulse-width modulation (PWM) to regulate the output voltage. It operates by switching the input voltage across an inductor and then filtering it to obtain the desired output voltage. The feedback pin monitors the output voltage and adjusts the duty cycle of the PWM signal to maintain a stable output.

Detailed Application Field Plans

The MAX8599ETE+T is widely used in various applications, including: 1. Portable electronic devices 2. Battery-powered systems 3. Industrial equipment 4. Automotive electronics 5. Communication devices

Detailed and Complete Alternative Models

  1. MAX8598ETE+T
  2. MAX8600ETE+T
  3. MAX8601ETE+T
  4. MAX8602ETE+T
  5. MAX8603ETE+T
  6. MAX8604ETE+T
  7. MAX8605ETE+T
  8. MAX8606ETE+T
  9. MAX8607ETE+T
  10. MAX8608ETE+T

These alternative models offer similar functionality and can be considered as alternatives to the MAX8599ETE+T.

Note: The content provided above is a sample and may not meet the exact word count requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX8599ETE+T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MAX8599ETE+T in technical solutions:

  1. Q: What is the MAX8599ETE+T? A: The MAX8599ETE+T is a high-efficiency, step-up DC-DC converter designed for applications requiring a regulated output voltage higher than the input voltage.

  2. Q: What is the input voltage range of the MAX8599ETE+T? A: The input voltage range of the MAX8599ETE+T is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of the MAX8599ETE+T? A: The output voltage range of the MAX8599ETE+T can be set from 4V to 28V using external resistors.

  4. Q: What is the maximum output current of the MAX8599ETE+T? A: The maximum output current of the MAX8599ETE+T is typically 500mA.

  5. Q: Can the MAX8599ETE+T operate with a single Li-ion battery as the input source? A: Yes, the MAX8599ETE+T can operate with a single Li-ion battery as long as the input voltage is within the specified range.

  6. Q: Does the MAX8599ETE+T have built-in overcurrent protection? A: Yes, the MAX8599ETE+T features overcurrent protection to prevent damage to the device and the load.

  7. Q: Is the MAX8599ETE+T suitable for automotive applications? A: Yes, the MAX8599ETE+T is qualified for automotive applications and meets the necessary standards.

  8. Q: Can the MAX8599ETE+T be used in battery-powered devices? A: Yes, the MAX8599ETE+T is suitable for battery-powered devices due to its low quiescent current and high efficiency.

  9. Q: Does the MAX8599ETE+T require any external components for operation? A: Yes, the MAX8599ETE+T requires a few external components such as input/output capacitors and resistors to set the output voltage.

  10. Q: What is the package type of the MAX8599ETE+T? A: The MAX8599ETE+T is available in a 16-pin TQFN package, which is compact and suitable for space-constrained applications.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.