MAX6841HUKD3+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: SOT23-5
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 1.8V to 5V
• Output Current: Up to 150mA
• Quiescent Current: 10µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6841HUKD3+T has a total of 5 pins:

1. GND: Ground connection.
2. IN: Input voltage pin.
3. FB: Feedback pin for setting the output voltage.
4. EN: Enable pin for turning the regulator on/off.
5. OUT: Output voltage pin.

Functional Features

• High Efficiency: The MAX6841HUKD3+T offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 10µA, it ensures minimal power consumption during standby or low-load conditions.
• Wide Input and Output Voltage Range: It supports a wide range of input and output voltages, providing flexibility in various applications.
• Enable Pin Control: The EN pin allows for easy on/off control of the regulator, conserving power when not needed.
• Short-Circuit Protection: The device includes built-in short-circuit protection, safeguarding against potential damage.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Wide input and output voltage range - Enable pin control for power management - Built-in short-circuit protection

Disadvantages: - Limited output current capacity (up to 150mA)

Working Principles

The MAX6841HUKD3+T is a voltage regulator IC that converts an input voltage within the specified range into a regulated output voltage. It utilizes internal circuitry to maintain a stable output voltage, even with varying input voltages or load conditions. The feedback pin (FB) allows users to set the desired output voltage by connecting external resistors.

Detailed Application Field Plans

The MAX6841HUKD3+T finds applications in various fields, including but not limited to:

1. Portable Electronics: Powering microcontrollers, sensors, and other low-power components in smartphones, tablets, and wearable devices.
2. IoT Devices: Providing regulated power to sensors, communication modules, and control circuits in Internet of Things (IoT) devices.
3. Battery-Powered Systems: Regulating voltage in battery-powered systems such as wireless headphones, portable speakers, and remote controls.
4. Industrial Automation: Powering control circuits, sensors, and actuators in industrial automation equipment.
5. Automotive Electronics: Voltage regulation for automotive applications like infotainment systems, lighting controls, and engine management systems.

Detailed and Complete Alternative Models

1. MAX6840HUKD3+T: Similar to MAX6841HUKD3+T, but with a different output voltage range (1.2V to 5V).
2. MAX6842HUKD3+T: Similar to MAX6841HUKD3+T, but with a higher output current capacity (up to 300mA).
3. MAX6843HUKD3+T: Similar to MAX6841HUKD3+T, but with additional features like thermal shutdown and adjustable current limit.

(Note: The above alternative models are for illustrative purposes only and may not represent an exhaustive list of alternatives.)

This entry provides a comprehensive overview of the MAX6841HUKD3+T voltage regulator IC. It includes information on its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.