Zie specificaties voor productdetails.
MAX6824ZUK+ - English Editing Encyclopedia Entry
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: Low Dropout, Low Quiescent Current
- Package: SOT-23-5
- Essence: Regulates voltage with low power consumption
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 120mV at 100mA load current
- Quiescent Current: 40µA (typical)
- Output Current: Up to 150mA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MAX6824ZUK+ has a total of five pins arranged as follows: 1. GND: Ground pin 2. IN: Input voltage pin 3. EN: Enable pin for turning the regulator on/off 4. BYP: Bypass capacitor connection pin 5. OUT: Output voltage pin
Functional Features
- Low dropout voltage ensures efficient regulation even with small input-output differentials.
- Low quiescent current minimizes power consumption in standby or idle modes.
- Thermal shutdown protection prevents damage due to excessive temperature.
- Short-circuit current limiting protects the device from overcurrent conditions.
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Small package size (SOT-23-5) enables space-saving designs.
- Low dropout voltage ensures stable output even with low input voltages.
- Low quiescent current prolongs battery life in portable applications.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- SOT-23-5 package may require additional heat dissipation measures in certain scenarios.
Working Principles
The MAX6824ZUK+ is a voltage regulator that maintains a stable output voltage regardless of input voltage fluctuations. It achieves this by utilizing an internal pass transistor and feedback circuitry. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain the desired output voltage.
Detailed Application Field Plans
The MAX6824ZUK+ can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable technology - Automotive electronics
Detailed and Complete Alternative Models
- LM1117-3.3: Low dropout voltage regulator with fixed 3.3V output.
- LT1763: Ultra-low quiescent current LDO regulator with adjustable output voltage.
- MCP1700: Low quiescent current LDO regulator with fixed output voltage options.
These alternative models offer similar functionality and can be considered based on specific application requirements.
Word count: 275 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX6824ZUK+ in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MAX6824ZUK+ in technical solutions:
Q: What is the MAX6824ZUK+? A: The MAX6824ZUK+ is a voltage detector and microprocessor (µP) supervisory circuit designed for monitoring power supply voltages in various applications.
Q: What is the operating voltage range of MAX6824ZUK+? A: The operating voltage range of MAX6824ZUK+ is typically between 1.6V and 5.5V.
Q: How does the MAX6824ZUK+ monitor the power supply voltage? A: The MAX6824ZUK+ compares the monitored voltage with a preset threshold and generates a reset signal if the voltage falls below the threshold.
Q: Can I adjust the threshold voltage of MAX6824ZUK+? A: Yes, the threshold voltage can be adjusted using external resistors connected to the VTH pin.
Q: What is the typical reset timeout period of MAX6824ZUK+? A: The typical reset timeout period of MAX6824ZUK+ is 140ms.
Q: Does MAX6824ZUK+ have an open-drain output? A: Yes, the MAX6824ZUK+ has an open-drain RESET output that can be pulled low during a reset condition.
Q: Can MAX6824ZUK+ operate in both active-high and active-low reset modes? A: Yes, MAX6824ZUK+ can be configured for either active-high or active-low reset operation.
Q: Is MAX6824ZUK+ suitable for battery-powered applications? A: Yes, MAX6824ZUK+ is suitable for battery-powered applications as it has a low quiescent current of typically 1.5µA.
Q: Can MAX6824ZUK+ tolerate voltage transients or spikes? A: Yes, MAX6824ZUK+ has built-in glitch immunity and can tolerate voltage transients or spikes up to 400mV.
Q: What package options are available for MAX6824ZUK+? A: MAX6824ZUK+ is available in a small SOT23-3 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.