MAX6761TAZWD3+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)
Use: Power Management
Characteristics: High Efficiency, Low Power Consumption
Package: WLP (Wafer Level Package)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.7V to 5.5V
Output Voltage Range: 0.8V to 3.6V
Output Current: Up to 500mA
Quiescent Current: 20µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6761TAZWD3+ has the following pin configuration:

VIN: Input Voltage
GND: Ground
EN: Enable Pin
FB: Feedback Pin
VOUT: Output Voltage
PG: Power Good Indicator

Functional Features

High efficiency voltage regulation
Low power consumption in standby mode
Overcurrent and overtemperature protection
Power good indicator for system monitoring
Enable pin for easy control of the device

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input and output voltage range for versatile applications - Small package size allows for space-saving designs - Power good indicator enhances system reliability

Disadvantages: - Limited output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The MAX6761TAZWD3+ is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 0.8V and 3.6V. It achieves high efficiency by utilizing advanced power management techniques. The device operates in a low quiescent current mode when not actively regulating the output voltage, resulting in reduced power consumption.

Detailed Application Field Plans

The MAX6761TAZWD3+ is commonly used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MAX6761TAZWD3+ include: - MAX6762TAZWD3+ - MAX6763TAZWD3+ - MAX6764TAZWD3+ - MAX6765TAZWD3+

These models are part of the same product family and provide comparable features and specifications.

In conclusion, the MAX6761TAZWD3+ is a voltage regulator IC designed for power management applications. Its high efficiency, low power consumption, and small package size make it suitable for various portable and battery-powered devices. While it has limitations in terms of output current and operating temperature range, it offers reliable voltage regulation and system monitoring capabilities.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX6761TAZWD3+ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MAX6761TAZWD3+ in technical solutions:

Q1: What is the MAX6761TAZWD3+? A1: The MAX6761TAZWD3+ is a voltage monitor and reset IC designed for use in various technical solutions.

Q2: What is the purpose of the MAX6761TAZWD3+? A2: The purpose of the MAX6761TAZWD3+ is to monitor the voltage level of a system and generate a reset signal when the voltage falls below a certain threshold.

Q3: What voltage range does the MAX6761TAZWD3+ support? A3: The MAX6761TAZWD3+ supports a voltage range from 0.5V to 5.5V.

Q4: How does the MAX6761TAZWD3+ generate a reset signal? A4: The MAX6761TAZWD3+ generates a reset signal by pulling the RESET output pin low when the monitored voltage falls below the specified threshold.

Q5: Can the threshold voltage be adjusted on the MAX6761TAZWD3+? A5: Yes, the threshold voltage can be adjusted using external resistors connected to the VTH input pin.

Q6: What is the typical accuracy of the voltage monitoring on the MAX6761TAZWD3+? A6: The typical accuracy of the voltage monitoring on the MAX6761TAZWD3+ is ±1.5%.

Q7: Does the MAX6761TAZWD3+ have any built-in delay for the reset signal? A7: Yes, the MAX6761TAZWD3+ has a fixed delay of 200ms for the reset signal to ensure proper stabilization of the system.

Q8: Can the MAX6761TAZWD3+ be used in battery-powered applications? A8: Yes, the MAX6761TAZWD3+ can be used in battery-powered applications as it operates within a wide voltage range and has low quiescent current.

Q9: What is the package type of the MAX6761TAZWD3+? A9: The MAX6761TAZWD3+ is available in a 6-pin WLP (Wafer-Level Package).

Q10: Are there any additional features or protections on the MAX6761TAZWD3+? A10: Yes, the MAX6761TAZWD3+ includes features like power-on reset, manual reset input, and overvoltage protection to enhance system reliability.

Please note that these answers are general and may vary depending on the specific application and requirements.