Zie specificaties voor productdetails.
MAX6411BS45+ - English Editing Encyclopedia Entry
Product Overview
Category
MAX6411BS45+ belongs to the category of voltage supervisors.
Use
It is primarily used for monitoring and controlling the voltage levels in electronic circuits.
Characteristics
- Voltage supervision range: 4.5V
- Package type: SOT23-5
- Essence: Precision voltage monitor with manual reset input
- Packaging/Quantity: Tape and Reel (3000 pieces per reel)
Specifications
The specifications of MAX6411BS45+ are as follows:
- Supply Voltage Range: 1.2V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Quiescent Current: 3µA (typical)
- Manual Reset Input Threshold: 0.2V (typical)
- Power-On Reset Timeout Period: 140ms (typical)
Detailed Pin Configuration
The pin configuration of MAX6411BS45+ is as follows:
- GND: Ground
- MR: Manual Reset Input
- RESET: Active-Low Reset Output
- VCC: Supply Voltage
- NC: No Connection
Functional Features
- Precision voltage monitoring
- Manual reset input for system control
- Active-low reset output signal
- Low quiescent current consumption
- Wide supply voltage range
Advantages and Disadvantages
Advantages
- Accurate voltage monitoring ensures reliable system operation.
- Manual reset input allows for controlled system resets.
- Low quiescent current minimizes power consumption.
- Wide supply voltage range provides flexibility in various applications.
Disadvantages
- Limited voltage supervision range (4.5V).
- Only available in SOT23-5 package.
Working Principles
MAX6411BS45+ operates by continuously monitoring the input voltage. When the voltage falls below the threshold level (4.5V), the active-low reset output is asserted, indicating a power failure or an abnormal voltage condition. The manual reset input allows the system to be reset manually when required.
Detailed Application Field Plans
MAX6411BS45+ finds applications in various fields, including but not limited to:
- Battery-powered devices
- Embedded systems
- Industrial control systems
- Automotive electronics
- Power management circuits
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to MAX6411BS45+ are:
- MAX6412BS46+: Similar to MAX6411BS45+, but with a higher voltage supervision range of 4.6V.
- MAX6413BS47+: Similar to MAX6411BS45+, but with a higher voltage supervision range of 4.7V.
- MAX6414BS48+: Similar to MAX6411BS45+, but with a higher voltage supervision range of 4.8V.
- MAX6415BS49+: Similar to MAX6411BS45+, but with a higher voltage supervision range of 4.9V.
These alternative models provide flexibility in choosing the appropriate voltage supervisor based on specific application requirements.
Word count: 346 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX6411BS45+ in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MAX6411BS45+ in technical solutions:
Q1: What is the MAX6411BS45+? A1: The MAX6411BS45+ is a voltage monitor and reset circuit that provides power supply monitoring and reset generation for microcontrollers, microprocessors, and other digital systems.
Q2: What is the operating voltage range of the MAX6411BS45+? A2: The MAX6411BS45+ operates within a voltage range of 1.6V to 5.5V.
Q3: How does the MAX6411BS45+ monitor the power supply? A3: The MAX6411BS45+ monitors the power supply by comparing the input voltage with a preset threshold voltage. It generates a reset signal when the input voltage falls below the threshold.
Q4: Can I adjust the threshold voltage of the MAX6411BS45+? A4: No, the threshold voltage of the MAX6411BS45+ is fixed at 4.5V.
Q5: What is the typical reset timeout period of the MAX6411BS45+? A5: The typical reset timeout period of the MAX6411BS45+ is 140ms.
Q6: Does the MAX6411BS45+ have an open-drain output? A6: Yes, the MAX6411BS45+ has an open-drain RESET output.
Q7: Can I use the MAX6411BS45+ in battery-powered applications? A7: Yes, the low quiescent current and wide operating voltage range make the MAX6411BS45+ suitable for battery-powered applications.
Q8: Is the MAX6411BS45+ available in different package options? A8: Yes, the MAX6411BS45+ is available in a SOT23-5 package.
Q9: Can I use the MAX6411BS45+ to monitor multiple power supplies? A9: Yes, the MAX6411BS45+ can be used to monitor multiple power supplies by connecting each supply to a separate MAX6411BS45+ device.
Q10: Does the MAX6411BS45+ have any built-in protection features? A10: Yes, the MAX6411BS45+ has built-in hysteresis to prevent false triggering due to noise or voltage fluctuations.
Please note that these answers are based on general information about the MAX6411BS45+ and may vary depending on specific application requirements.