MAX6306UK30D2+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low Dropout Voltage - High Output Current - Adjustable Output Voltage - Thermal Shutdown Protection

Package: SOT-23-5

Essence: The MAX6306UK30D2+ is a voltage regulator IC that provides a stable output voltage for various electronic devices.

Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel.

Specifications

• Input Voltage Range: 2.5V to 6.5V
• Output Voltage Range: 1.2V to 5.5V
• Dropout Voltage: 120mV at 100mA
• Output Current: Up to 150mA
• Quiescent Current: 40µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6306UK30D2+ has the following pin configuration:

1. GND (Ground)
2. FB (Feedback)
3. EN (Enable)
4. VOUT (Output Voltage)
5. VIN (Input Voltage)

Functional Features

• Low Dropout Voltage: The MAX6306UK30D2+ exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
• High Output Current: With a maximum output current of 150mA, this voltage regulator can power a wide range of electronic components.
• Adjustable Output Voltage: The output voltage can be adjusted within the range of 1.2V to 5.5V, providing flexibility for different applications.
• Thermal Shutdown Protection: The IC incorporates thermal shutdown protection, preventing damage due to excessive temperature.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation. - High output current capability. - Adjustable output voltage for versatility. - Thermal shutdown protection prevents damage.

Disadvantages: - Limited maximum output current compared to some other voltage regulators. - SOT-23-5 package may require careful handling during soldering.

Working Principles

The MAX6306UK30D2+ operates as a linear voltage regulator. It regulates the output voltage by comparing it with an internal reference voltage. The feedback pin (FB) is used to adjust the output voltage, while the enable pin (EN) controls the regulator's operation. When enabled, the IC maintains a stable output voltage by adjusting the pass transistor's resistance based on the input and output voltages.

Detailed Application Field Plans

The MAX6306UK30D2+ finds applications in various electronic devices that require a stable and adjustable voltage supply. Some potential application fields include:

1. Battery-Powered Devices: Portable electronics such as smartphones, tablets, and wearable devices can benefit from the MAX6306UK30D2+'s low dropout voltage and adjustable output voltage.
2. IoT Devices: Internet of Things (IoT) devices often operate on low power and require precise voltage regulation. This voltage regulator can be used in sensors, smart home devices, and other IoT applications.
3. Automotive Electronics: The MAX6306UK30D2+ can be utilized in automotive systems where a stable voltage supply is crucial, such as infotainment systems, lighting modules, and control units.

Detailed and Complete Alternative Models

1. LM1117-3.3: A popular alternative with similar specifications and package type.
2. LT1763: Offers higher output current and lower dropout voltage but comes in a different package.
3. MCP1700: Provides a lower quiescent current and adjustable output voltage range.

These alternative models can be considered based on specific requirements and compatibility with the target application.

Word count: 511 words