Zie specificaties voor productdetails.
MAX5097AATE+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: High efficiency, low dropout voltage, small package size
- Package: TDFN-8 (Thin Dual Flat No-Lead)
- Essence: Regulates input voltage to a desired output voltage level
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage Range: 1.2V to 3.3V
- Maximum Output Current: 500mA
- Dropout Voltage: 120mV at 500mA
- Quiescent Current: 40µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MAX5097AATE+T has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage pin
- NC: No connection
- NC: No connection
- PG: Power good indicator pin
Functional Features
- Low dropout voltage ensures efficient power conversion even with low input voltages.
- Wide input voltage range allows for flexibility in various applications.
- Power good indicator provides a signal indicating stable output voltage.
- Enable pin allows for easy on/off control of the regulator.
Advantages and Disadvantages
Advantages: - High efficiency results in minimal power loss during voltage regulation. - Small package size saves board space in compact designs. - Wide input voltage range makes it suitable for a variety of applications.
Disadvantages: - Limited maximum output current may not be sufficient for high-power applications. - Dropout voltage may affect performance in low voltage scenarios.
Working Principles
The MAX5097AATE+T is a voltage regulator that maintains a stable output voltage level regardless of fluctuations in the input voltage. It achieves this by utilizing an internal control circuitry that adjusts the pass transistor to regulate the output voltage. The enable pin allows for easy on/off control, while the power good indicator provides a signal indicating when the output voltage is within the desired range.
Detailed Application Field Plans
The MAX5097AATE+T is commonly used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems
Detailed and Complete Alternative Models
- MAX5097AATE+: Similar to MAX5097AATE+T, but without the power good indicator pin.
- MAX5097BATE+T: Higher maximum output current of 1A, suitable for higher-power applications.
- MAX5097CATE+T: Extended operating temperature range of -40°C to +125°C, ideal for harsh environments.
Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.
Word count: 346 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX5097AATE+T in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MAX5097AATE+T in technical solutions:
Q: What is the MAX5097AATE+T? A: The MAX5097AATE+T is a high-voltage, low-quiescent current linear regulator designed for use in various technical solutions.
Q: What is the input voltage range of the MAX5097AATE+T? A: The input voltage range of the MAX5097AATE+T is typically between 4.5V and 60V.
Q: What is the output voltage range of the MAX5097AATE+T? A: The output voltage range of the MAX5097AATE+T can be adjusted from 1.25V to 57V using external resistors.
Q: What is the maximum output current of the MAX5097AATE+T? A: The maximum output current of the MAX5097AATE+T is 100mA.
Q: Is the MAX5097AATE+T suitable for battery-powered applications? A: Yes, the MAX5097AATE+T has a low quiescent current and is suitable for battery-powered applications where power efficiency is important.
Q: Does the MAX5097AATE+T have built-in thermal protection? A: Yes, the MAX5097AATE+T features built-in thermal shutdown protection to prevent overheating.
Q: Can the MAX5097AATE+T operate in harsh environments? A: Yes, the MAX5097AATE+T is designed to operate in a wide temperature range (-40°C to +125°C) and is suitable for harsh environments.
Q: Can the MAX5097AATE+T be used in automotive applications? A: Yes, the MAX5097AATE+T is AEC-Q100 qualified and can be used in automotive applications.
Q: Does the MAX5097AATE+T require any external components for operation? A: Yes, the MAX5097AATE+T requires a few external components such as input/output capacitors and resistors to set the output voltage.
Q: Is there a datasheet available for the MAX5097AATE+T? A: Yes, you can find the datasheet for the MAX5097AATE+T on the manufacturer's website or through authorized distributors.