Meixin Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX5068BAUE+T
Details bekijken DataSheets

MAX5068BAUE+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: TSSOP-16
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.6V to 55V
  • Maximum Output Current: 2A
  • Quiescent Current: 17µA
  • Switching Frequency: 100kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input Voltage Pin
  2. GND: Ground Pin
  3. FB: Feedback Pin
  4. EN: Enable Pin
  5. SS/TR: Soft-Start/Tracking Pin
  6. VCC: Supply Voltage Pin
  7. PGND: Power Ground Pin
  8. SW: Switch Node Pin
  9. BST: Bootstrap Pin
  10. COMP: Compensation Pin
  11. SS/TR: Soft-Start/Tracking Pin
  12. AGND: Analog Ground Pin
  13. PGND: Power Ground Pin
  14. VOUT: Output Voltage Pin
  15. VOUT: Output Voltage Pin
  16. VCC: Supply Voltage Pin

Functional Features

  • High Efficiency: The MAX5068BAUE+T offers high efficiency power conversion, minimizing energy loss during operation.
  • Low Quiescent Current: With a quiescent current of only 17µA, the IC consumes minimal power when in standby mode.
  • Wide Input Voltage Range: The device can accept input voltages ranging from 4.5V to 60V, making it suitable for various applications.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low quiescent current consumption - Wide input voltage range

Disadvantages: - Limited maximum output current (2A)

Working Principles

The MAX5068BAUE+T is a voltage regulator IC that utilizes a switching regulator topology to efficiently convert the input voltage to a regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to regulate the output voltage based on the feedback received from the FB pin. The EN pin allows for enable/disable control, while the SS/TR pin provides soft-start and tracking functionality.

Detailed Application Field Plans

The MAX5068BAUE+T finds applications in various fields, including but not limited to:

  1. Automotive: Power management in automotive systems, such as infotainment systems, lighting, and motor control.
  2. Industrial: Voltage regulation in industrial equipment, including factory automation, robotics, and power supplies.
  3. Telecommunications: Power management for telecommunications infrastructure, such as base stations and network equipment.
  4. Consumer Electronics: Voltage regulation in consumer electronic devices, such as smartphones, tablets, and portable audio players.

Detailed and Complete Alternative Models

  1. MAX5069BAUE+T: Similar to MAX5068BAUE+T, but with a higher maximum output current of 3A.
  2. MAX5070BAUE+T: Similar to MAX5068BAUE+T, but with a lower quiescent current of 10µA.
  3. MAX5071BAUE+T: Similar to MAX5068BAUE+T, but with a wider input voltage range of 4.5V to 75V.

(Note: The above alternative models are just examples and not an exhaustive list.)

This concludes the encyclopedia entry for MAX5068BAUE+T, providing an overview of its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX5068BAUE+T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MAX5068BAUE+T in technical solutions:

  1. Q: What is the MAX5068BAUE+T? A: The MAX5068BAUE+T is a high-efficiency, synchronous step-down DC-DC converter IC.

  2. Q: What is the input voltage range of the MAX5068BAUE+T? A: The input voltage range of the MAX5068BAUE+T is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of the MAX5068BAUE+T? A: The output voltage range of the MAX5068BAUE+T can be adjusted from 0.6V to 90% of the input voltage.

  4. Q: What is the maximum output current of the MAX5068BAUE+T? A: The maximum output current of the MAX5068BAUE+T is typically 3A.

  5. Q: Does the MAX5068BAUE+T require an external compensation network? A: No, the MAX5068BAUE+T has an internal compensation network, eliminating the need for an external one.

  6. Q: Can the MAX5068BAUE+T operate in a wide temperature range? A: Yes, the MAX5068BAUE+T is designed to operate in a temperature range of -40°C to +125°C.

  7. Q: Does the MAX5068BAUE+T have built-in protection features? A: Yes, the MAX5068BAUE+T includes overcurrent protection, thermal shutdown, and undervoltage lockout features.

  8. Q: What type of package does the MAX5068BAUE+T come in? A: The MAX5068BAUE+T is available in a 16-pin TSSOP package.

  9. Q: Can the MAX5068BAUE+T be used in battery-powered applications? A: Yes, the MAX5068BAUE+T has a low quiescent current and can be used in battery-powered applications.

  10. Q: Are there any evaluation boards or reference designs available for the MAX5068BAUE+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help with the implementation of the MAX5068BAUE+T in various applications.

Please note that these answers are general and may vary depending on specific application requirements.