Meixin Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX16963SATED/V+T
Details bekijken DataSheets

MAX16963SATED/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: TDFN (Thin Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel / 3000 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 90% of VIN
  • Maximum Output Current: 1A
  • Quiescent Current: 17µA
  • Switching Frequency: 2.2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16963SATED/V+T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching node pin
  6. PG: Power Good pin
  7. VOUT: Output voltage pin

Functional Features

  • High efficiency up to 95%
  • Low quiescent current for improved power savings
  • Wide input voltage range allows for versatile applications
  • Integrated power good indicator for system monitoring
  • Overcurrent and overtemperature protection for enhanced reliability

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range enables compatibility with various power sources - Integrated power good indicator simplifies system monitoring - Overcurrent and overtemperature protection enhance system reliability

Disadvantages: - Limited maximum output current of 1A may not be suitable for high-power applications - Higher switching frequency may introduce additional noise in sensitive circuits

Working Principles

The MAX16963SATED/V+T is a voltage regulator IC that converts an input voltage within the range of 4.5V to 60V to a regulated output voltage. It achieves high efficiency by utilizing a synchronous buck topology and operates at a switching frequency of 2.2MHz.

The device incorporates a feedback mechanism to maintain the desired output voltage. It also includes overcurrent and overtemperature protection features to safeguard the system from potential faults.

Detailed Application Field Plans

The MAX16963SATED/V+T finds applications in various fields, including but not limited to:

  1. Automotive: Power management for automotive electronics, such as infotainment systems, lighting modules, and sensors.
  2. Industrial: Voltage regulation for industrial control systems, motor drives, and instrumentation equipment.
  3. Telecommunications: Power supply for telecom infrastructure, base stations, and network equipment.
  4. Consumer Electronics: Voltage regulation for portable devices, home appliances, and audio/video equipment.

Detailed and Complete Alternative Models

  1. MAX16962SATED/V+T: Similar specifications with a lower maximum output current of 500mA.
  2. MAX16964SATED/V+T: Similar specifications with a higher maximum output current of 2A.
  3. MAX16965SATED/V+T: Similar specifications with an extended input voltage range up to 100V.

(Note: The above alternative models are suggestions and may not cover all available options in the market.)

This entry provides comprehensive information about the MAX16963SATED/V+T voltage regulator IC, including its product details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX16963SATED/V+T in technische oplossingen

  1. What is the input voltage range of MAX16963SATED/V+T?
    - The input voltage range of MAX16963SATED/V+T is 4.5V to 36V.

  2. What is the maximum output current of MAX16963SATED/V+T?
    - The maximum output current of MAX16963SATED/V+T is 3A.

  3. Can MAX16963SATED/V+T be used in automotive applications?
    - Yes, MAX16963SATED/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX16963SATED/V+T?
    - The typical efficiency of MAX16963SATED/V+T is 95%.

  5. Does MAX16963SATED/V+T have overcurrent protection?
    - Yes, MAX16963SATED/V+T features overcurrent protection.

  6. What is the operating temperature range of MAX16963SATED/V+T?
    - The operating temperature range of MAX16963SATED/V+T is -40°C to +125°C.

  7. Can MAX16963SATED/V+T be used in LED lighting applications?
    - Yes, MAX16963SATED/V+T is suitable for LED lighting applications.

  8. Does MAX16963SATED/V+T require an external compensation network?
    - No, MAX16963SATED/V+T does not require an external compensation network.

  9. What is the package type of MAX16963SATED/V+T?
    - MAX16963SATED/V+T is available in a 16-pin TDFN package.

  10. Is MAX16963SATED/V+T RoHS compliant?
    - Yes, MAX16963SATED/V+T is RoHS compliant.