Meixin Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX16125WTCS16+
Details bekijken DataSheets

MAX16125WTCS16+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX16125WTCS16+ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for voltage monitoring and protection in various electronic devices.

Characteristics

  • Voltage monitoring and protection
  • Low power consumption
  • Small form factor
  • High accuracy
  • Wide operating temperature range

Package

MAX16125WTCS16+ is available in a 16-pin TSSOP package.

Essence

The essence of MAX16125WTCS16+ lies in its ability to monitor and protect voltage levels, ensuring the safe operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 10µA (typical)
  • Overvoltage Threshold Accuracy: ±1%
  • Undervoltage Threshold Accuracy: ±1%
  • Fault Detection Timeout: Programmable

Detailed Pin Configuration

  1. VDD: Power supply input
  2. GND: Ground reference
  3. EN: Enable pin for device operation
  4. FAULT: Output indicating fault condition
  5. OV: Overvoltage threshold pin
  6. UV: Undervoltage threshold pin
  7. NC: No connection
  8. NC: No connection
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Overvoltage and undervoltage monitoring
  • Programmable fault detection timeout
  • Power supply voltage supervision
  • Fault indication through the FAULT pin

Advantages and Disadvantages

Advantages

  • High accuracy voltage monitoring
  • Low power consumption
  • Wide operating temperature range
  • Small form factor

Disadvantages

  • Limited pin configuration options
  • Lack of built-in protection features for other electrical parameters

Working Principles

MAX16125WTCS16+ operates by continuously monitoring the input voltage. It compares the voltage level with the programmed overvoltage and undervoltage thresholds. If the voltage exceeds or falls below the set thresholds, the device triggers a fault condition and indicates it through the FAULT pin. The fault detection timeout can be programmed to control the response time.

Detailed Application Field Plans

MAX16125WTCS16+ finds applications in various electronic devices that require voltage monitoring and protection. Some potential application fields include:

  1. Power supplies
  2. Battery-powered devices
  3. Industrial automation systems
  4. Automotive electronics
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. MAX16126WTCS16+: Similar to MAX16125WTCS16+, but with additional built-in protection features for other electrical parameters.
  2. MAX16127WTCS16+: A higher voltage range variant of MAX16125WTCS16+.
  3. MAX16128WTCS16+: Offers extended temperature range compared to MAX16125WTCS16+.

These alternative models provide similar functionality with slight variations to cater to specific requirements.

Word count: 440 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX16125WTCS16+ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MAX16125WTCS16+ in technical solutions:

  1. Q: What is the MAX16125WTCS16+? A: The MAX16125WTCS16+ is a voltage monitor and reset IC designed for use in various technical solutions.

  2. Q: What is the operating voltage range of MAX16125WTCS16+? A: The operating voltage range of MAX16125WTCS16+ is from 1.6V to 5.5V.

  3. Q: How does the MAX16125WTCS16+ provide voltage monitoring? A: The MAX16125WTCS16+ monitors the voltage level of a power supply and provides a reset signal when the voltage falls below a specified threshold.

  4. Q: Can I adjust the voltage threshold for the reset signal? A: Yes, the voltage threshold for the reset signal can be adjusted using external resistors.

  5. Q: What is the typical reset timeout period of MAX16125WTCS16+? A: The typical reset timeout period of MAX16125WTCS16+ is 140ms.

  6. Q: Does the MAX16125WTCS16+ have an open-drain output? A: Yes, the MAX16125WTCS16+ has an open-drain reset output.

  7. Q: Can I use the MAX16125WTCS16+ in battery-powered applications? A: Yes, the low quiescent current and wide operating voltage range make it suitable for battery-powered applications.

  8. Q: Is the MAX16125WTCS16+ available in a small package? A: Yes, the MAX16125WTCS16+ is available in a compact 16-pin TSSOP package.

  9. Q: Can I use the MAX16125WTCS16+ in automotive applications? A: Yes, the MAX16125WTCS16+ is qualified for automotive applications and operates over a wide temperature range.

  10. Q: Are there any evaluation kits or reference designs available for MAX16125WTCS16+? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help with the implementation of MAX16125WTCS16+ in various technical solutions.

Please note that these answers are general and may vary depending on specific application requirements.