MAX16058ATT29+ - Product Overview

Category

The MAX16058ATT29+ belongs to the category of integrated circuits (ICs) and specifically falls under the family of voltage supervisors.

Use

This product is primarily used for monitoring and supervising voltage levels in electronic systems. It ensures that the voltage remains within specified limits, triggering appropriate actions when thresholds are exceeded or not met.

Characteristics

• Voltage supervision range: The MAX16058ATT29+ operates within a wide voltage range, making it suitable for various applications.
• Low power consumption: This IC consumes minimal power, making it energy-efficient.
• High accuracy: It provides precise voltage monitoring, ensuring reliable performance.
• Small package size: The MAX16058ATT29+ comes in a compact package, saving valuable board space.
• Robust design: It is designed to withstand harsh operating conditions, ensuring durability.

Package and Quantity

The MAX16058ATT29+ is available in a small surface-mount package, typically provided in reels or tubes. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Supply voltage range: 1.6V to 5.5V
• Threshold voltage options: Programmable threshold voltages to suit specific requirements
• Operating temperature range: -40°C to +85°C
• Output type: Active-low push-pull or open-drain
• Quiescent current: Typically less than 2µA

Pin Configuration

The MAX16058ATT29+ features a standard pin configuration with the following pins: 1. VCC: Power supply input 2. GND: Ground reference 3. RESET#: Active-low reset output 4. TH: Threshold voltage selection pin 5. MR#: Manual reset input

Functional Features

• Voltage monitoring: The MAX16058ATT29+ continuously monitors the input voltage and compares it with the programmed threshold voltage.
• Reset generation: When the input voltage falls below or exceeds the threshold, the IC generates a reset signal to initiate appropriate actions.
• Manual reset: The MR# pin allows for manual reset, enabling system control in specific scenarios.

Advantages

• Versatility: The wide supply voltage range and programmable threshold voltages make it suitable for various applications.
• Low power consumption: The IC's low quiescent current ensures minimal power usage, enhancing energy efficiency.
• Compact size: The small package size saves valuable board space, especially in compact electronic systems.
• High accuracy: The MAX16058ATT29+ provides precise voltage monitoring, ensuring reliable operation.

Disadvantages

• Lack of built-in hysteresis: This IC does not incorporate hysteresis, which may be required in certain applications to prevent oscillations near the threshold voltage.

Working Principles

The MAX16058ATT29+ operates by comparing the input voltage with the programmed threshold voltage. If the voltage falls below or exceeds the threshold, the IC generates a reset signal. This signal can be used to trigger actions such as system shutdown, fault detection, or recovery procedures.

Detailed Application Field Plans

The MAX16058ATT29+ finds application in various fields, including: 1. Power management systems 2. Battery-powered devices 3. Industrial automation 4. Automotive electronics 5. Consumer electronics

Alternative Models

Several alternative models offer similar functionality to the MAX16058ATT29+. Some notable alternatives include: - MAX16059ATT29+ - LTC2917IGN#PBF - ADM708TARZ

These alternatives provide comparable voltage supervision capabilities and can be considered based on specific requirements.

In conclusion, the MAX16058ATT29+ is a versatile voltage supervisor IC that offers precise monitoring, low power consumption, and a compact package. It finds application in diverse fields and has alternative models available in the market.