Meixin Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX1513ETP+
Details bekijken DataSheets

MAX1513ETP+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX1513ETP+ belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a power management IC.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Small package size

Package

MAX1513ETP+ is available in a TQFN package.

Essence

The essence of MAX1513ETP+ lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: Adjustable from 0.6V to VIN
  • Maximum Output Current: 1.5A
  • Quiescent Current: 50µA (typical)
  • Switching Frequency: 1.2MHz (typical)

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. LX: Inductor connection pin
  4. SW: Switching node pin
  5. FB: Feedback pin
  6. EN: Enable pin
  7. PGND: Power ground pin
  8. VOUT: Output voltage pin

Functional Features

  • Integrated synchronous step-down DC-DC converter
  • Automatic mode switching for high efficiency
  • Soft-start and soft-shutdown functions
  • Overcurrent and overtemperature protection
  • Adjustable output voltage through feedback pin

Advantages and Disadvantages

Advantages

  • High efficiency leads to longer battery life
  • Wide input voltage range allows compatibility with various power sources
  • Small package size saves board space
  • Integrated protection features enhance reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Lack of adjustable switching frequency

Working Principles

MAX1513ETP+ operates as a synchronous step-down DC-DC converter. It converts the input voltage to a lower, adjustable output voltage using an inductor and capacitors. The integrated circuit ensures high efficiency by automatically switching between PWM (Pulse Width Modulation) and PFM (Pulse Frequency Modulation) modes based on the load requirements.

Detailed Application Field Plans

MAX1513ETP+ finds applications in various electronic devices, including: 1. Portable consumer electronics 2. Battery-powered devices 3. IoT (Internet of Things) devices 4. Wearable devices 5. Embedded systems

Detailed and Complete Alternative Models

  1. MAX1509: Similar power management IC with higher maximum output current (2A)
  2. MAX1510: Power management IC with adjustable switching frequency
  3. MAX1511: Power management IC with integrated USB charger functionality
  4. MAX1512: Power management IC with higher input voltage range (up to 16V)

These alternative models provide similar functionalities to MAX1513ETP+ but may have different specifications or additional features.

In conclusion, MAX1513ETP+ is a highly efficient power management IC that offers a wide input voltage range and small package size. Its integrated protection features and automatic mode switching make it suitable for various electronic devices. However, its limited maximum output current and lack of adjustable switching frequency may restrict its use in certain applications.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX1513ETP+ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MAX1513ETP+ in technical solutions:

  1. Q: What is the MAX1513ETP+? A: The MAX1513ETP+ is a high-efficiency, low-quiescent-current, step-up DC-DC converter.

  2. Q: What is the input voltage range of the MAX1513ETP+? A: The input voltage range is typically between 0.7V and 5.5V.

  3. Q: What is the output voltage range of the MAX1513ETP+? A: The output voltage range can be set from 1.8V to 5.5V using external resistors.

  4. Q: What is the maximum output current of the MAX1513ETP+? A: The maximum output current is typically 200mA.

  5. Q: Can the MAX1513ETP+ operate with a single-cell lithium-ion battery? A: Yes, the MAX1513ETP+ can operate with a single-cell lithium-ion battery.

  6. Q: Does the MAX1513ETP+ have built-in overcurrent protection? A: Yes, the MAX1513ETP+ has built-in overcurrent protection to prevent damage to the device.

  7. Q: Can the MAX1513ETP+ be used in portable electronic devices? A: Yes, the MAX1513ETP+ is suitable for use in portable electronic devices due to its low quiescent current and small form factor.

  8. Q: Is the MAX1513ETP+ compatible with both analog and digital loads? A: Yes, the MAX1513ETP+ is compatible with both analog and digital loads.

  9. Q: Does the MAX1513ETP+ have thermal shutdown protection? A: Yes, the MAX1513ETP+ has thermal shutdown protection to prevent overheating.

  10. Q: Can the MAX1513ETP+ be used in automotive applications? A: No, the MAX1513ETP+ is not specifically designed for automotive applications and may not meet the required standards.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.