DS80C390-FNR

Product Overview

Use

This microcontroller is primarily used for embedded systems and applications that require high-performance computing capabilities.

Characteristics

High processing speed
Low power consumption
Integrated peripherals for enhanced functionality
Robust architecture for reliable operation

Package

The DS80C390-FNR is available in a compact and durable package, ensuring easy integration into various electronic devices.

Essence

The essence of the DS80C390-FNR lies in its ability to provide efficient and reliable control and processing capabilities for embedded systems.

Packaging/Quantity

The DS80C390-FNR is typically packaged in trays or reels, with varying quantities depending on the manufacturer's specifications.

Specifications

Architecture: 8-bit
Clock Speed: Up to 40 MHz
Memory: Flash memory up to 128 KB, RAM up to 4 KB
Operating Voltage: 2.7V to 5.5V
I/O Pins: 32
Communication Interfaces: UART, SPI, I2C
Timers/Counters: 3
Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The DS80C390-FNR features a total of 44 pins, each serving a specific purpose. The pin configuration is as follows:

VDD - Power supply voltage
VSS - Ground
P0.0 - General-purpose I/O pin
P0.1 - General-purpose I/O pin
P0.2 - General-purpose I/O pin
P0.3 - General-purpose I/O pin
P0.4 - General-purpose I/O pin
P0.5 - General-purpose I/O pin
P0.6 - General-purpose I/O pin
P0.7 - General-purpose I/O pin
P1.0 - General-purpose I/O pin
P1.1 - General-purpose I/O pin
P1.2 - General-purpose I/O pin
P1.3 - General-purpose I/O pin
P1.4 - General-purpose I/O pin
P1.5 - General-purpose I/O pin
P1.6 - General-purpose I/O pin
P1.7 - General-purpose I/O pin
P2.0 - General-purpose I/O pin
P2.1 - General-purpose I/O pin
P2.2 - General-purpose I/O pin
P2.3 - General-purpose I/O pin
P2.4 - General-purpose I/O pin
P2.5 - General-purpose I/O pin
P2.6 - General-purpose I/O pin
P2.7 - General-purpose I/O pin
P3.0 - General-purpose I/O pin
P3.1 - General-purpose I/O pin
P3.2 - General-purpose I/O pin
P3.3 - General-purpose I/O pin
P3.4 - General-purpose I/O pin
P3.5 - General-purpose I/O pin
P3.6 - General-purpose I/O pin
P3.7 - General-purpose I/O pin
XTAL1 - Crystal oscillator input
XTAL2 - Crystal oscillator output
RESET - Reset pin
EA/VPP - External Access/Programming Enable
ALE/PROG - Address Latch Enable/Program Enable
PSEN - Program Store Enable
RD - Read control signal
WR - Write control signal
INT0 - External interrupt 0
INT1 - External interrupt 1

Functional Features

The DS80C390-FNR offers several functional features that enhance its performance and usability:

High-speed processing capabilities for efficient execution of complex tasks
Integrated peripherals such as UART, SPI, and I2C for seamless communication with external devices
Timers/counters for precise timing and event management
Analog-to-digital converter (ADC) for accurate measurement and data acquisition
Low power consumption modes for energy-efficient operation
Robust architecture with built-in protection mechanisms for reliable operation in harsh environments

Advantages and Disadvantages

Advantages

High processing speed enables quick execution of tasks
Integrated peripherals simplify system design and reduce component count
Low power consumption prolongs battery life in portable applications

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DS80C390-FNR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of DS80C390-FNR in technical solutions:

Q: What is DS80C390-FNR? A: DS80C390-FNR is a microcontroller chip manufactured by Maxim Integrated. It is commonly used in embedded systems and technical solutions.
Q: What are the key features of DS80C390-FNR? A: Some key features of DS80C390-FNR include a 16-bit CPU core, on-chip peripherals, multiple communication interfaces, and low power consumption.
Q: What are the typical applications of DS80C390-FNR? A: DS80C390-FNR is often used in applications such as industrial automation, automotive electronics, consumer electronics, and IoT devices.
Q: Can DS80C390-FNR be programmed using C/C++? A: Yes, DS80C390-FNR can be programmed using C/C++ programming languages. It also supports assembly language programming.
Q: Does DS80C390-FNR have built-in memory? A: Yes, DS80C390-FNR has on-chip memory including RAM and ROM. It also supports external memory expansion.
Q: What communication interfaces are supported by DS80C390-FNR? A: DS80C390-FNR supports various communication interfaces such as UART, SPI, I2C, CAN, and Ethernet.
Q: Is DS80C390-FNR suitable for real-time applications? A: Yes, DS80C390-FNR is suitable for real-time applications due to its fast processing speed and support for real-time operating systems.
Q: Can DS80C390-FNR interface with sensors and actuators? A: Yes, DS80C390-FNR can interface with various sensors and actuators through its GPIO pins and communication interfaces.
Q: What is the power supply voltage range for DS80C390-FNR? A: The power supply voltage range for DS80C390-FNR is typically between 2.7V and 5.5V.
Q: Are development tools available for programming DS80C390-FNR? A: Yes, Maxim Integrated provides development tools such as compilers, debuggers, and IDEs to facilitate programming and debugging of DS80C390-FNR-based solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and implementations.