Zie specificaties voor productdetails.
DS2502AX-500+T
Product Overview
Category
The DS2502AX-500+T belongs to the category of electronic components.
Use
This product is commonly used in various electronic devices and systems for data storage and identification purposes.
Characteristics
- Compact size
- High durability
- Non-volatile memory
- Low power consumption
Package
The DS2502AX-500+T is available in a small surface-mount package, which ensures easy integration into electronic circuits.
Essence
The essence of this product lies in its ability to store and retrieve data reliably, making it suitable for applications requiring secure and efficient data management.
Packaging/Quantity
The DS2502AX-500+T is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.
Specifications
- Memory capacity: 512 bits
- Operating voltage: 2.8V to 5.25V
- Data transfer rate: Up to 16.3 kbps
- Temperature range: -40°C to +85°C
- Write endurance: 10,000 cycles
- Data retention: Up to 10 years
Detailed Pin Configuration
The DS2502AX-500+T features the following pin configuration:
- VCC: Power supply input
- GND: Ground connection
- DATA: Serial data input/output
- NC: No connection (reserved for future use)
Functional Features
- Unique 64-bit ROM code for device identification
- One-wire interface for simple communication
- Overdrive mode for faster data transfer
- Programmable read-only memory (EPROM) functionality
- Secure memory partitioning for enhanced data protection
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration
- High durability ensures long-term reliability
- Low power consumption for energy-efficient operation
- Secure memory partitioning enhances data security
Disadvantages
- Limited memory capacity may not be suitable for certain applications requiring larger storage space
- Relatively slower data transfer rate compared to some other similar products
Working Principles
The DS2502AX-500+T utilizes a one-wire interface, enabling communication with a microcontroller or host system. It operates based on the principles of non-volatile memory, allowing data to be stored even when power is disconnected. The device uses a unique 64-bit ROM code for identification and features programmable read-only memory functionality.
Detailed Application Field Plans
The DS2502AX-500+T finds application in various fields, including but not limited to:
- Asset tracking systems
- Access control systems
- Inventory management systems
- Electronic locks
- Medical devices
- Automotive electronics
- Smart cards
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the DS2502AX-500+T include:
- DS2431: Higher memory capacity (1024 bits) with similar characteristics
- DS28E05: Extended memory capacity (5120 bits) with additional features like temperature sensing
- DS1990A-F5: Lower memory capacity (64 bits) but compatible with the same one-wire interface
These alternative models provide options for different application requirements and can be considered based on specific needs.
Word count: 511 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DS2502AX-500+T in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of DS2502AX-500+T in technical solutions:
Q: What is DS2502AX-500+T? A: DS2502AX-500+T is a specific model of a 1-Wire EEPROM chip manufactured by Maxim Integrated. It is commonly used for data storage and identification purposes.
Q: What is the operating voltage range of DS2502AX-500+T? A: The operating voltage range of DS2502AX-500+T is typically between 2.8V and 5.25V.
Q: How much memory does DS2502AX-500+T have? A: DS2502AX-500+T has a total memory capacity of 512 bits or 64 bytes.
Q: Can DS2502AX-500+T be used for temperature sensing? A: No, DS2502AX-500+T is not specifically designed for temperature sensing. It is primarily used for identification and small data storage applications.
Q: What is the communication protocol used by DS2502AX-500+T? A: DS2502AX-500+T uses the 1-Wire communication protocol, which allows multiple devices to be connected on a single bus using only one data line.
Q: Can DS2502AX-500+T be used in harsh environments? A: Yes, DS2502AX-500+T is designed to operate in a wide temperature range (-40°C to +85°C) and can withstand harsh environmental conditions.
Q: How can I program DS2502AX-500+T? A: DS2502AX-500+T can be programmed using a 1-Wire interface and appropriate software tools provided by Maxim Integrated.
Q: Can DS2502AX-500+T be used in battery-powered applications? A: Yes, DS2502AX-500+T has low power consumption and can be used in battery-powered applications without significantly draining the battery.
Q: What are some typical applications of DS2502AX-500+T? A: DS2502AX-500+T is commonly used for product identification, authentication, asset tracking, and small data storage in various industries such as automotive, industrial, and consumer electronics.
Q: Is DS2502AX-500+T compatible with other 1-Wire devices? A: Yes, DS2502AX-500+T is fully compatible with other 1-Wire devices, allowing for easy integration into existing systems or networks.
Please note that these answers are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the official datasheet and documentation provided by Maxim Integrated for accurate and detailed information.