DS1836CS-10+ - English Editing Encyclopedia Entry

Product Overview

Category

The DS1836CS-10+ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for temperature monitoring and control in various electronic devices.

Characteristics

• Temperature range: -55°C to +125°C
• Accuracy: ±2°C
• Supply voltage: 2.7V to 5.5V
• Low power consumption
• Small form factor

Package

The DS1836CS-10+ is available in a surface-mount package.

Essence

The essence of DS1836CS-10+ lies in its ability to accurately measure and control temperature in electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per package.

Specifications

• Temperature range: -55°C to +125°C
• Accuracy: ±2°C
• Resolution: 0.5°C
• Supply voltage: 2.7V to 5.5V
• Operating current: 1.5μA (typical)
• Shutdown current: 0.1μA (typical)
• Communication interface: I2C

Detailed Pin Configuration

The DS1836CS-10+ has the following pin configuration:

1. VCC: Power supply input
2. GND: Ground reference
3. SDA: Serial data line (I2C)
4. SCL: Serial clock line (I2C)
5. ALERT: Temperature alert output
6. RESET: Reset input

Functional Features

• Accurate temperature measurement and control
• Programmable temperature thresholds
• Nonvolatile storage of temperature limits
• Temperature alert output for system notification
• Low power consumption for energy efficiency
• I2C communication interface for easy integration

Advantages and Disadvantages

Advantages

• Wide temperature range allows for versatile applications
• High accuracy ensures precise temperature control
• Small form factor enables integration in compact designs
• Nonvolatile storage preserves temperature limits even during power loss
• Low power consumption minimizes energy usage

Disadvantages

• Limited resolution of 0.5°C may not be sufficient for certain applications
• I2C communication interface may require additional circuitry for compatibility with other protocols

Working Principles

The DS1836CS-10+ utilizes a built-in temperature sensor to measure the ambient temperature. It compares the measured temperature with the programmed temperature thresholds stored in its nonvolatile memory. If the temperature exceeds or falls below the set limits, the device triggers an alert signal. The I2C interface allows for easy configuration and monitoring of the device.

Detailed Application Field Plans

The DS1836CS-10+ finds applications in various fields, including:

1. HVAC systems: Temperature monitoring and control in heating, ventilation, and air conditioning systems.
2. Industrial equipment: Thermal management in machinery and industrial processes.
3. Consumer electronics: Temperature regulation in laptops, gaming consoles, and home appliances.
4. Automotive: Monitoring and control of temperature-sensitive components in vehicles.
5. Medical devices: Precise temperature control in medical equipment and laboratory instruments.

Detailed and Complete Alternative Models

1. DS18B20: Digital temperature sensor with higher resolution and one-wire interface.
2. LM35: Analog temperature sensor with wide temperature range and linear output.
3. TMP36: Low-cost analog temperature sensor with voltage output.
4. MAX31855: Thermocouple-to-digital converter with high accuracy and SPI interface.
5. MCP9808: High-accuracy digital temperature sensor with I2C interface.

Note: This list is not exhaustive and there are many other alternative models available in the market.

In conclusion, the DS1836CS-10+ is a versatile temperature monitoring and control IC with a wide temperature range, high accuracy, and low power consumption. Its compact size and I2C interface make it suitable for various applications in different industries. However, its limited resolution and specific communication interface may pose limitations in certain scenarios.