Littelfuse Inc.
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
SMA6L10A
Details bekijken DataSheets

SMA6L10A - Product Overview

Introduction

The SMA6L10A is a diode belonging to the category of TVS (Transient Voltage Suppressor) diodes. These diodes are designed to protect sensitive electronics from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Basic Information Overview

  • Category: TVS Diode
  • Use: Protection against voltage transients
  • Characteristics: Fast response time, low clamping voltage
  • Package: SMA (DO-214AC)
  • Essence: Safeguarding electronic circuits from voltage spikes
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Peak Pulse Power: 600W
  • Breakdown Voltage Range: 6.4V to 7.0V
  • Operating Temperature Range: -55°C to 150°C
  • Storage Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The SMA6L10A TVS diode typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Rapid response to transient voltage events
  • Low clamping voltage to minimize stress on protected components
  • High surge current capability for robust protection

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Compact package size

Disadvantages

  • Limited peak pulse power handling compared to larger TVS diodes
  • Higher clamping voltage compared to some specialized TVS diodes

Working Principles

When a transient voltage event occurs, the SMA6L10A TVS diode rapidly conducts, diverting the excess energy away from the protected circuit. This action limits the voltage across the circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The SMA6L10A is commonly used in various applications, including: - Consumer electronics - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies

Detailed and Complete Alternative Models

Some alternative TVS diodes to consider include: - SMA6J10A: Similar characteristics but with a lower breakdown voltage - SMA6L12A: Higher breakdown voltage for increased protection

In conclusion, the SMA6L10A TVS diode offers effective protection against voltage transients in a compact package, making it suitable for a wide range of electronic applications.

[Word count: 345]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SMA6L10A in technische oplossingen

  1. What is SMA6L10A?

    • SMA6L10A is a type of TVS (transient voltage suppressor) diode designed to protect sensitive electronic components from voltage spikes and transients.

  2. What are the key features of SMA6L10A?

    • The key features of SMA6L10A include a low clamping voltage, high surge capability, fast response time, and compatibility with automated placement equipment.

  3. In what technical solutions can SMA6L10A be used?

    • SMA6L10A can be used in various technical solutions such as power supplies, automotive electronics, industrial controls, telecommunications equipment, and consumer electronics.

  4. How does SMA6L10A provide protection in power supply applications?

    • In power supply applications, SMA6L10A protects sensitive components from voltage surges caused by lightning, ESD (electrostatic discharge), or other transient events, thereby preventing damage to the system.

  5. What is the maximum clamping voltage of SMA6L10A?

    • The maximum clamping voltage of SMA6L10A is typically around 17 volts, which means it limits the voltage spike to a safe level for the protected circuitry.

  6. Can SMA6L10A be used in automotive electronics?

    • Yes, SMA6L10A is suitable for use in automotive electronics to safeguard against voltage transients that may occur in the vehicle's electrical system.

  7. What is the temperature range for SMA6L10A?

    • The operating temperature range for SMA6L10A is usually between -55°C to 150°C, making it suitable for a wide range of environmental conditions.

  8. Does SMA6L10A comply with industry standards for surge protection?

    • Yes, SMA6L10A typically complies with industry standards such as IEC 61000-4-5 for surge protection, ensuring its reliability in demanding applications.

  9. How can SMA6L10A contribute to improving the reliability of industrial control systems?

    • By providing robust transient voltage suppression, SMA6L10A helps enhance the reliability of industrial control systems by preventing damage from voltage spikes and transients.

  10. Are there any application notes or design guidelines available for implementing SMA6L10A in technical solutions?

    • Yes, manufacturers often provide application notes and design guidelines to assist engineers in effectively integrating SMA6L10A into their technical solutions, ensuring optimal performance and protection.