Littelfuse Inc.
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
P6SMBJ200C
Details bekijken DataSheets

P6SMBJ200C - Product Overview and Analysis

Introduction

The P6SMBJ200C is a vital component in the field of electronic devices, offering protection against transient voltage surges. This entry will provide an in-depth analysis of the product, covering its category, use, characteristics, package, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Provides protection against transient voltage surges in electronic circuits
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SMB (DO-214AA)
  • Essence: Safeguards electronic components from voltage spikes
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

  • Voltage - Reverse Standoff (Typ): 171V
  • Voltage - Breakdown (Min): 189V
  • Voltage - Clamping (Max) @ Ipp: 274V
  • Current - Peak Pulse (10/1000µs): 17.2A
  • Power - Peak Pulse: 600W
  • Type: Unidirectional

Detailed Pin Configuration

The P6SMBJ200C TVS diode typically consists of two pins: the cathode and the anode. The cathode is marked with a bar or line on the diode body, indicating the direction of the flow of current.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltage spikes to protect sensitive electronic components.
  • Fast Response Time: Rapid reaction to voltage surges ensures minimal impact on the protected circuitry.
  • High Surge Current Capability: Capable of handling substantial surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against transient voltage spikes
  • Fast response time
  • High surge current capability

Disadvantages

  • Limited to unidirectional protection
  • Requires careful consideration of polarity during installation

Working Principles

The P6SMBJ200C operates by diverting excessive transient voltage away from the protected circuitry, thereby limiting the voltage across the load. When a surge occurs, the diode rapidly conducts, providing a low-impedance path for the excess energy to be dissipated.

Detailed Application Field Plans

The P6SMBJ200C finds extensive application in various electronic systems, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. P6SMBJ188C: Similar characteristics with slightly lower clamping voltage
  2. P6SMBJ220C: Higher clamping voltage and peak pulse power rating
  3. P6SMBJ170C: Lower reverse standoff voltage with comparable surge current capability

In conclusion, the P6SMBJ200C TVS diode serves as a crucial protective element in electronic circuits, offering fast and reliable transient voltage suppression. Its robust characteristics make it a preferred choice for safeguarding sensitive components in a wide range of applications.

Word Count: 443

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van P6SMBJ200C in technische oplossingen

Sure, here are 10 common questions and answers related to the application of P6SMBJ200C in technical solutions:

  1. What is the voltage rating of P6SMBJ200C?

    • P6SMBJ200C has a voltage rating of 200V.

  2. What is the peak pulse power of P6SMBJ200C?

    • The peak pulse power of P6SMBJ200C is 600W.

  3. What is the typical application of P6SMBJ200C?

    • P6SMBJ200C is commonly used for transient voltage suppression in electronic circuits, such as in power supplies, industrial controls, and automotive systems.

  4. What is the breakdown voltage of P6SMBJ200C?

    • The breakdown voltage of P6SMBJ200C is typically 222V.

  5. What is the maximum clamping voltage of P6SMBJ200C?

    • The maximum clamping voltage of P6SMBJ200C is 324V at 1A.

  6. How does P6SMBJ200C protect electronic circuits?

    • P6SMBJ200C provides protection by diverting excessive current away from sensitive components when a transient voltage spike occurs.

  7. Can P6SMBJ200C be used in automotive applications?

    • Yes, P6SMBJ200C is suitable for use in automotive electronics to protect against voltage transients.

  8. What is the response time of P6SMBJ200C?

    • The response time of P6SMBJ200C is very fast, typically responding within nanoseconds to transient voltage spikes.

  9. Is P6SMBJ200C RoHS compliant?

    • Yes, P6SMBJ200C is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  10. Can P6SMBJ200C be used in high-speed data line protection?

    • Yes, P6SMBJ200C can be used to protect high-speed data lines, such as Ethernet, USB, and HDMI, from voltage surges and ESD events.

I hope these questions and answers are helpful! Let me know if you need further assistance.