Littelfuse Inc.
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
P6SMB62
Details bekijken DataSheets

P6SMB62: Product Overview and Detailed Information

Introduction

The P6SMB62 is a transient voltage suppressor (TVS) diode that belongs to the category of semiconductor devices used for protecting sensitive electronics from voltage spikes. This entry will provide an in-depth overview of the P6SMB62, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor/TVS Diode
  • Use: Protection against voltage spikes/transients
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: SMB (DO-214AA)
  • Essence: Transient voltage suppression
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Voltage - Reverse Standoff (Typ): 53.3V
  • Voltage - Breakdown (Min): 59.3V
  • Voltage - Clamping (Max) @ Ipp: 96V
  • Current - Peak Pulse (10/1000µs): 34.4A
  • Power - Peak Pulse: 600W
  • Type: Zener

Detailed Pin Configuration

The P6SMB62 TVS diode typically has two pins, with the cathode marked by a line on the body of the diode. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Provides protection by diverting excessive current away from sensitive components during voltage transients.
  • Fast Response Time: Reacts quickly to voltage spikes, minimizing the risk of damage to connected electronics.
  • High Surge Capability: Can handle large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • May require additional circuitry for comprehensive protection

Working Principles

The P6SMB62 operates based on the principle of avalanche breakdown. When a voltage spike occurs, the TVS diode rapidly conducts, shunting excess current away from the protected circuit. This action prevents the voltage from reaching levels that could damage sensitive components.

Detailed Application Field Plans

The P6SMB62 is commonly used in various applications, including: - Telecommunications: Protecting communication equipment from lightning-induced surges. - Consumer Electronics: Safeguarding sensitive electronic devices such as smartphones, tablets, and laptops from power surges. - Automotive Electronics: Providing surge protection for vehicle electronics, including entertainment systems and engine control units.

Detailed and Complete Alternative Models

Some alternative models to the P6SMB62 include: - P6SMB6.8A: Similar characteristics with a lower breakdown voltage - P6SMB68CA: Higher breakdown voltage and clamping voltage - P6SMB120A: Higher power dissipation capability

In conclusion, the P6SMB62 TVS diode offers effective protection against voltage spikes and finds widespread use in various electronic applications. Its fast response time and high surge capability make it a valuable component in safeguarding sensitive electronics.

Word count: 498

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van P6SMB62 in technische oplossingen

  1. What is the voltage rating of P6SMB62?

    • The voltage rating of P6SMB62 is 62 volts.

  2. What is the peak pulse power of P6SMB62?

    • The peak pulse power of P6SMB62 is typically 600 watts at 10/1000μs.

  3. What is the breakdown voltage of P6SMB62?

    • The breakdown voltage of P6SMB62 is 68.9 to 75.9 volts.

  4. What is the maximum clamping voltage of P6SMB62?

    • The maximum clamping voltage of P6SMB62 is 100 volts at 1A.

  5. What is the operating temperature range of P6SMB62?

    • The operating temperature range of P6SMB62 is -55°C to +150°C.

  6. What are the typical applications for P6SMB62?

    • P6SMB62 is commonly used in surge protection for telecommunications equipment, automotive electronics, and industrial control systems.

  7. What is the response time of P6SMB62?

    • The response time of P6SMB62 is less than 1 picosecond.

  8. What is the package type of P6SMB62?

    • P6SMB62 is available in a DO-214AA (SMB) package.

  9. What is the reverse stand-off voltage of P6SMB62?

    • The reverse stand-off voltage of P6SMB62 is 53.3 volts.

  10. What are the key features of P6SMB62?

    • P6SMB62 offers low incremental surge resistance, fast response time, and high reliability for overvoltage protection in various electronic applications.