Littelfuse Inc.
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
15KPA28C-B
Details bekijken DataSheets

15KPA28C-B

Product Category

The 15KPA28C-B belongs to the category of transient voltage suppressor (TVS) diodes.

Basic Information Overview

  • Use: The 15KPA28C-B is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.
  • Characteristics: It has a high surge capability, low clamping voltage, and fast response time.
  • Package: The 15KPA28C-B is available in a DO-201AD package.
  • Essence: Its essence lies in providing robust overvoltage protection for electronic circuits.
  • Packaging/Quantity: Typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Peak Pulse Power: 15000W
  • Standoff Voltage: 28V
  • Breakdown Voltage: 31.1V
  • Maximum Clamping Voltage: 45.4V
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 15KPA28C-B typically consists of two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Transient Suppression: Effectively suppresses voltage transients to protect downstream components.
  • Fast Response Time: Rapidly responds to transient events, safeguarding the circuitry.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.

Advantages and Disadvantages

  • Advantages:
    • Robust overvoltage protection
    • Fast response time
    • High surge capability
  • Disadvantages:
    • Can introduce some capacitance to the circuit
    • May require additional circuitry for optimal performance in complex systems

Working Principles

The 15KPA28C-B operates by diverting excessive current away from sensitive components when a transient voltage event occurs. It achieves this by rapidly transitioning into a low impedance state, effectively shunting the excess energy to ground.

Detailed Application Field Plans

The 15KPA28C-B finds extensive use in various applications, including: - Telecommunications: Protecting communication equipment from lightning-induced surges. - Industrial Control Systems: Safeguarding control circuitry from inductive load switching transients. - Automotive Electronics: Shielding vehicle electronics from voltage spikes.

Detailed and Complete Alternative Models

  • 15KPA Series: Includes various models with different standoff voltages and power ratings, catering to diverse application requirements.
  • P6KE Series: Offers alternative TVS diodes with similar characteristics but differing specifications.

This comprehensive entry provides a detailed understanding of the 15KPA28C-B, encompassing its category, basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 15KPA28C-B in technische oplossingen

  1. What is the 15KPA28C-B component used for in technical solutions?

    • The 15KPA28C-B is a transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage spikes and transients.

  2. What is the maximum peak pulse power of the 15KPA28C-B?

    • The 15KPA28C-B has a maximum peak pulse power of 15000 watts, making it suitable for high-power applications.

  3. What is the breakdown voltage of the 15KPA28C-B?

    • The breakdown voltage of the 15KPA28C-B is 28 volts, allowing it to clamp transient voltages at or below this level.

  4. How does the 15KPA28C-B provide protection in technical solutions?

    • The 15KPA28C-B clamps transient voltages to a safe level, diverting excess energy away from sensitive components and preventing damage.

  5. What are the typical applications of the 15KPA28C-B in technical solutions?

    • The 15KPA28C-B is commonly used in power supplies, industrial equipment, automotive electronics, and telecommunications systems to protect against voltage surges.

  6. Is the 15KPA28C-B suitable for high-frequency applications?

    • Yes, the 15KPA28C-B has a fast response time and is suitable for high-frequency applications where rapid transient suppression is required.

  7. What are the environmental considerations for using the 15KPA28C-B in technical solutions?

    • The 15KPA28C-B is designed to meet environmental standards and is compatible with lead-free soldering processes.

  8. Does the 15KPA28C-B require heat sinking in high-power applications?

    • Yes, in high-power applications, proper heat sinking is recommended to ensure the 15KPA28C-B operates within its temperature limits.

  9. Can the 15KPA28C-B be used in conjunction with other protective devices?

    • Yes, the 15KPA28C-B can be used in combination with other protective components such as varistors and gas discharge tubes for comprehensive transient protection.

  10. What are the key electrical characteristics that make the 15KPA28C-B suitable for technical solutions?

    • The 15KPA28C-B offers low clamping voltage, high surge capability, and low leakage current, making it well-suited for demanding technical applications.