Zie specificaties voor productdetails.
1.5SMC24C Product Overview
Introduction
The 1.5SMC24C is a transient voltage suppressor diode designed to protect electronic circuits from overvoltage transients. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Transient Voltage Suppressor Diode
- Use: Protecting electronic circuits from overvoltage transients
- Characteristics: Fast response time, high surge capability, low clamping voltage
- Package: SMC (DO-214AB)
- Essence: Provides robust protection against voltage transients
- Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer
Specifications
- Peak Pulse Power: 1500W
- Standoff Voltage: 24V
- Breakdown Voltage Range: 26.7V to 29.5V
- Maximum Clamping Voltage: 38.9V at 10A
- Operating Temperature Range: -55°C to 150°C
- Storage Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The 1.5SMC24C typically has two pins, with the anode and cathode connections for easy integration into circuit designs.
Functional Features
- Rapid response to transient overvoltage events
- High surge capability for reliable protection
- Low clamping voltage to minimize stress on protected components
Advantages and Disadvantages
Advantages
- Effective protection against voltage transients
- Fast response time
- Wide operating temperature range
Disadvantages
- Limited to specific voltage ratings
- Requires careful consideration of placement in circuit design
Working Principles
When a transient overvoltage event occurs, the 1.5SMC24C rapidly conducts current to divert excess energy away from sensitive components, thereby limiting the voltage across the protected circuit.
Detailed Application Field Plans
The 1.5SMC24C is commonly used in various applications, including: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
Several alternative models with similar characteristics and performance include: - 1.5SMC6.8C - 1.5SMC12C - 1.5SMC36C - 1.5SMC48C
In conclusion, the 1.5SMC24C transient voltage suppressor diode offers robust protection against overvoltage transients, making it an essential component in various electronic applications.
[Word Count: 366]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 1.5SMC24C in technische oplossingen
What is 1.5SMC24C and its application in technical solutions?
- 1.5SMC24C is a type of TVS (transient voltage suppressor) diode used to protect electronic circuits from overvoltage transients.
How does 1.5SMC24C protect electronic circuits?
- It clamps the voltage across the circuit when a transient voltage spike occurs, diverting excess current away from sensitive components.
What are the key specifications of 1.5SMC24C?
- The 1.5SMC24C has a peak pulse power rating, breakdown voltage, and maximum clamping voltage that are important for its application in technical solutions.
In what technical applications is 1.5SMC24C commonly used?
- It is commonly used in power supplies, communication equipment, automotive electronics, and industrial control systems to protect against voltage surges.
What are the considerations for integrating 1.5SMC24C into a technical solution?
- Factors such as PCB layout, thermal management, and compatibility with other components need to be considered for effective integration.
How does 1.5SMC24C compare to other TVS diodes in technical applications?
- Its clamping voltage, response time, and energy absorption capabilities should be compared to select the most suitable TVS diode for a specific application.
What are the failure modes of 1.5SMC24C in technical solutions?
- Understanding failure modes such as degradation due to prolonged exposure to high currents or voltages is crucial for ensuring long-term reliability.
Are there any application notes or design guidelines available for using 1.5SMC24C in technical solutions?
- Manufacturers often provide application notes and design guidelines to assist engineers in effectively implementing 1.5SMC24C in their designs.
How can 1.5SMC24C be tested and validated in a technical solution?
- Testing methods such as transient voltage suppression testing and thermal performance testing can be employed to validate the effectiveness of 1.5SMC24C.
What are the industry standards or certifications relevant to the use of 1.5SMC24C in technical solutions?
- Compliance with standards such as IEC, UL, and RoHS may be necessary, and certifications from regulatory bodies ensure the quality and safety of the component in technical solutions.