Zie specificaties voor productdetails.
LT3973HDD-3.3#TRPBF
Product Overview
Category
The LT3973HDD-3.3#TRPBF belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulator ICs.
Use
This product is primarily used for voltage regulation in various electronic devices and systems.
Characteristics
- Input Voltage Range: 2.7V to 60V
- Output Voltage: 3.3V
- Maximum Output Current: 1A
- Efficiency: Up to 95%
- Package Type: DFN-10
- Operating Temperature Range: -40°C to 125°C
Package and Quantity
The LT3973HDD-3.3#TRPBF is available in a DFN-10 package. It is typically sold in reels or tubes, with a quantity of 2500 units per reel.
Specifications
- Input Voltage Range: 2.7V to 60V
- Output Voltage: 3.3V ±2%
- Maximum Output Current: 1A
- Dropout Voltage: 300mV at 1A
- Quiescent Current: 50µA
- Switching Frequency: 2.2MHz
- Operating Temperature Range: -40°C to 125°C
- Protection Features: Overcurrent, Overtemperature, Reverse Battery Protection
Pin Configuration
The LT3973HDD-3.3#TRPBF has the following pin configuration:
Pin 1: VIN (Input Voltage)
Pin 2: GND (Ground)
Pin 3: SW (Switch Node)
Pin 4: FB (Feedback)
Pin 5: VOUT (Output Voltage)
Pin 6: COMP (Compensation)
Pin 7: SS (Soft-Start)
Pin 8: EN (Enable)
Pin 9: VCC (Supply Voltage)
Pin 10: PGND (Power Ground)
Functional Features
- Wide Input Voltage Range: The LT3973HDD-3.3#TRPBF can accept input voltages ranging from 2.7V to 60V, making it suitable for a wide range of applications.
- High Efficiency: With an efficiency of up to 95%, this voltage regulator minimizes power losses and maximizes energy conversion.
- Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the circuit and connected devices from excessive current flow.
- Reverse Battery Protection: The LT3973HDD-3.3#TRPBF includes reverse battery protection, preventing damage in case of accidental reverse polarity connection.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for versatile application possibilities.
- High efficiency reduces power dissipation and extends battery life.
- Compact DFN-10 package offers space-saving benefits.
- Overcurrent and reverse battery protection enhance system reliability.
Disadvantages
- Limited output current of 1A may not be sufficient for high-power applications.
- Higher cost compared to some alternative models.
Working Principles
The LT3973HDD-3.3#TRPBF is a step-down (buck) voltage regulator that converts higher input voltages to a regulated 3.3V output. It utilizes a switching regulator topology to achieve high efficiency. The internal control circuitry adjusts the duty cycle of the switching transistor to maintain the desired output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans
The LT3973HDD-3.3#TRPBF finds applications in various fields, including but not limited to: - Automotive electronics - Industrial automation - Telecommunications equipment - Power management systems - Portable electronic devices
Detailed and Complete Alternative Models
- LM1117-3.3: A popular linear voltage regulator with a fixed 3.3V output.
- TPS54332: A step-down voltage regulator with adjustable output voltage and higher output current capability.
- LT1763-3.3: A low dropout (LDO) voltage regulator with a fixed 3.3V output and ultra-low quiescent current.
These alternative models offer different features and specifications, providing flexibility for various application requirements.
Word count: 446 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LT3973HDD-3.3#TRPBF in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of LT3973HDD-3.3#TRPBF in technical solutions:
1. What is the input voltage range for LT3973HDD-3.3#TRPBF? The input voltage range for LT3973HDD-3.3#TRPBF is from 2.7V to 60V.
2. What is the output voltage of LT3973HDD-3.3#TRPBF? LT3973HDD-3.3#TRPBF has a fixed output voltage of 3.3V.
3. What is the maximum output current of LT3973HDD-3.3#TRPBF? The maximum output current of LT3973HDD-3.3#TRPBF is 1A.
4. Can LT3973HDD-3.3#TRPBF operate with a lower input voltage than 2.7V? No, LT3973HDD-3.3#TRPBF requires a minimum input voltage of 2.7V to operate properly.
5. Is LT3973HDD-3.3#TRPBF suitable for battery-powered applications? Yes, LT3973HDD-3.3#TRPBF is suitable for battery-powered applications due to its wide input voltage range and low quiescent current.
6. Does LT3973HDD-3.3#TRPBF have built-in protection features? Yes, LT3973HDD-3.3#TRPBF includes features like overvoltage protection, overcurrent protection, and thermal shutdown.
7. Can LT3973HDD-3.3#TRPBF be used in automotive applications? Yes, LT3973HDD-3.3#TRPBF is suitable for automotive applications as it can handle the wide input voltage range typically found in automotive systems.
8. What is the efficiency of LT3973HDD-3.3#TRPBF? The efficiency of LT3973HDD-3.3#TRPBF depends on the input and output voltage levels, as well as the load current. It typically achieves high efficiencies above 90%.
9. Can LT3973HDD-3.3#TRPBF be used in step-up (boost) configurations? Yes, LT3973HDD-3.3#TRPBF can be used in both step-down (buck) and step-up (boost) configurations, making it versatile for various applications.
10. Does LT3973HDD-3.3#TRPBF require any external components for operation? LT3973HDD-3.3#TRPBF requires a few external components such as input and output capacitors, an inductor, and feedback resistors to set the desired output voltage. The datasheet provides detailed application circuit examples.
Please note that these answers are based on general information about LT3973HDD-3.3#TRPBF. For specific design considerations and detailed information, it is recommended to refer to the product datasheet and consult the manufacturer or technical support.