Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL9005IRLZ-T
Details bekijken DataSheets

ISL9005IRLZ-T

Product Overview

Category

ISL9005IRLZ-T belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9005IRLZ-T comes in a small package, typically a 10-pin DFN (Dual Flat No-Lead) package.

Essence

The essence of ISL9005IRLZ-T lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

ISL9005IRLZ-T is usually packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Output Current: Up to 500mA
  • Dropout Voltage: 200mV at 300mA
  • Quiescent Current: 17µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. SW: Switching pin
  7. PG: Power good indicator pin
  8. NC: Not connected pin
  9. NC: Not connected pin
  10. VREF: Reference voltage pin

Functional Features

  • High efficiency conversion
  • Low dropout voltage for better performance
  • Adjustable output voltage for flexibility
  • Overcurrent and thermal protection for safety
  • Power good indicator for monitoring output status

Advantages

  • High efficiency ensures minimal power loss
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable output voltage enables customization for different applications
  • Overcurrent and thermal protection safeguards the circuit and connected devices
  • Power good indicator provides real-time feedback on the output status

Disadvantages

  • Limited output current capacity (up to 500mA)
  • Relatively higher quiescent current compared to some other voltage regulators
  • Requires external components for proper operation and stability

Working Principles

ISL9005IRLZ-T operates based on a switching regulator topology. It uses an internal control loop to maintain a stable output voltage, regardless of variations in the input voltage or load conditions. The device employs pulse-width modulation (PWM) techniques to regulate the output voltage efficiently.

Detailed Application Field Plans

ISL9005IRLZ-T finds application in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Wearable devices - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

  1. ISL9005IRLZ
  2. ISL9005IRLZ-T7A
  3. ISL9005IRLZ-TK
  4. ISL9005IRLZ-TK7A
  5. ISL9005IRLZ-TK8A

These alternative models offer similar functionality and characteristics to ISL9005IRLZ-T, providing options for different design requirements and preferences.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL9005IRLZ-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL9005IRLZ-T in technical solutions:

  1. Q: What is ISL9005IRLZ-T? A: ISL9005IRLZ-T is a low dropout voltage regulator (LDO) designed for use in various technical solutions.

  2. Q: What is the input voltage range of ISL9005IRLZ-T? A: The input voltage range of ISL9005IRLZ-T is typically between 1.8V and 5.5V.

  3. Q: What is the output voltage range of ISL9005IRLZ-T? A: The output voltage range of ISL9005IRLZ-T can be adjusted from 0.6V to 3.6V using external resistors.

  4. Q: What is the maximum output current of ISL9005IRLZ-T? A: The maximum output current of ISL9005IRLZ-T is typically 300mA.

  5. Q: Is ISL9005IRLZ-T suitable for battery-powered applications? A: Yes, ISL9005IRLZ-T is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

  6. Q: Can ISL9005IRLZ-T handle high input voltages? A: No, ISL9005IRLZ-T is not designed to handle high input voltages. It is recommended to stay within the specified input voltage range.

  7. Q: Does ISL9005IRLZ-T have built-in thermal protection? A: Yes, ISL9005IRLZ-T has built-in thermal shutdown protection to prevent overheating.

  8. Q: Can ISL9005IRLZ-T be used in automotive applications? A: Yes, ISL9005IRLZ-T is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification.

  9. Q: What is the typical dropout voltage of ISL9005IRLZ-T? A: The typical dropout voltage of ISL9005IRLZ-T is around 200mV at full load.

  10. Q: Is ISL9005IRLZ-T available in different package options? A: Yes, ISL9005IRLZ-T is available in a small 6-pin DFN package, making it suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.