Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL9000IRJNZ
Details bekijken DataSheets

ISL9000IRJNZ

Product Overview

Category

ISL9000IRJNZ belongs to the category of integrated voltage regulators.

Use

It is primarily used for regulating and stabilizing voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9000IRJNZ comes in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of ISL9000IRJNZ lies in its ability to provide stable and regulated voltage to electronic devices, ensuring their proper functioning.

Packaging/Quantity

ISL9000IRJNZ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Dropout Voltage: 200mV at 300mA
  • Quiescent Current: 25µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL9000IRJNZ has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • High efficiency conversion
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Adjustable output voltage through feedback pin

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power loss
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable output voltage provides flexibility for different applications
  • Overcurrent and thermal protection safeguards the circuit and connected devices

Disadvantages

  • Limited output voltage range may not be suitable for certain applications requiring higher voltages
  • Quiescent current, although low, still consumes some power in standby mode

Working Principles

ISL9000IRJNZ operates based on a switching regulator topology. It utilizes an internal control loop to maintain the desired output voltage by adjusting the duty cycle of the internal switches. This allows it to efficiently convert the input voltage to the desired output voltage while minimizing power loss.

Detailed Application Field Plans

ISL9000IRJNZ finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL9000IRJNZ include: - LM1117: Low dropout voltage regulator - LT1763: Adjustable voltage regulator with low quiescent current - TPS7A47: High-efficiency voltage regulator with wide input voltage range

These alternative models can be considered based on specific requirements and application needs.

Word count: 314 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL9000IRJNZ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL9000IRJNZ in technical solutions:

  1. Q: What is ISL9000IRJNZ? A: ISL9000IRJNZ is a voltage regulator IC (integrated circuit) designed for use in various technical solutions.

  2. Q: What are the key features of ISL9000IRJNZ? A: Some key features of ISL9000IRJNZ include low dropout voltage, high PSRR (power supply rejection ratio), and low quiescent current.

  3. Q: What is the input voltage range supported by ISL9000IRJNZ? A: ISL9000IRJNZ supports an input voltage range from 2.5V to 5.5V.

  4. Q: What is the output voltage range of ISL9000IRJNZ? A: The output voltage range of ISL9000IRJNZ can be adjusted from 0.8V to 3.6V.

  5. Q: Can ISL9000IRJNZ handle high current loads? A: Yes, ISL9000IRJNZ is capable of handling high current loads up to 300mA.

  6. Q: Is ISL9000IRJNZ suitable for battery-powered applications? A: Yes, ISL9000IRJNZ is well-suited for battery-powered applications due to its low quiescent current and low dropout voltage.

  7. Q: Does ISL9000IRJNZ have built-in protection features? A: Yes, ISL9000IRJNZ includes built-in protection features such as thermal shutdown and current limit protection.

  8. Q: Can ISL9000IRJNZ operate in a wide temperature range? A: Yes, ISL9000IRJNZ is designed to operate in a wide temperature range from -40°C to +85°C.

  9. Q: What are some typical applications of ISL9000IRJNZ? A: Some typical applications of ISL9000IRJNZ include portable devices, IoT (Internet of Things) devices, and industrial equipment.

  10. Q: Is ISL9000IRJNZ available in different package options? A: Yes, ISL9000IRJNZ is available in various package options such as DFN, QFN, and WLCSP, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific technical solution and implementation.