Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL8840AMUZ-T
Details bekijken DataSheets

ISL8840AMUZ-T

Product Overview

Category

ISL8840AMUZ-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL8840AMUZ-T is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of ISL8840AMUZ-T lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

ISL8840AMUZ-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 24V
  • Maximum Output Current: 3A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The detailed pin configuration of ISL8840AMUZ-T is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the IC on/off
  6. SS: Soft-start pin for gradual power-up
  7. PGND: Power ground pin
  8. LX: Switching node pin for connecting the external inductor

Functional Features

  • Integrated high-side and low-side MOSFETs
  • Pulse-width modulation (PWM) control
  • Frequency synchronization capability
  • Adjustable soft-start time
  • Overcurrent protection with hiccup mode
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Integrated protection features enhance reliability

Disadvantages

  • Limited maximum output current may restrict certain high-power applications
  • Requires external components for complete functionality

Working Principles

ISL8840AMUZ-T operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. This control mechanism ensures efficient power transfer from the input to the output, while maintaining stability and protection against overcurrent and thermal issues.

Detailed Application Field Plans

ISL8840AMUZ-T finds application in various fields, including but not limited to: - Power supplies for consumer electronics - Industrial automation systems - Automotive electronics - LED lighting systems - Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL8840AMUZ-T are: - LM2576-ADJ - LT1073-5 - TPS5430-Q1 - MAX5033-D - MC34063A

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 346 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL8840AMUZ-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL8840AMUZ-T in technical solutions:

  1. Q: What is ISL8840AMUZ-T? A: ISL8840AMUZ-T is a high-performance synchronous buck controller IC used for voltage regulation in various technical solutions.

  2. Q: What is the input voltage range supported by ISL8840AMUZ-T? A: The input voltage range supported by ISL8840AMUZ-T is typically between 4.5V and 14V.

  3. Q: What is the output voltage range that can be regulated using ISL8840AMUZ-T? A: ISL8840AMUZ-T can regulate output voltages ranging from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL8840AMUZ-T can handle? A: ISL8840AMUZ-T can handle a maximum output current of up to 20A.

  5. Q: Can ISL8840AMUZ-T operate in a wide temperature range? A: Yes, ISL8840AMUZ-T is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  6. Q: Does ISL8840AMUZ-T support adjustable switching frequency? A: Yes, ISL8840AMUZ-T supports adjustable switching frequency, allowing flexibility in design.

  7. Q: What type of protection features does ISL8840AMUZ-T offer? A: ISL8840AMUZ-T offers various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  8. Q: Can ISL8840AMUZ-T be used in battery-powered applications? A: Yes, ISL8840AMUZ-T can be used in battery-powered applications as it supports a wide input voltage range.

  9. Q: Is ISL8840AMUZ-T suitable for high-efficiency power conversion? A: Yes, ISL8840AMUZ-T is designed for high-efficiency power conversion with its synchronous buck controller architecture.

  10. Q: What are some typical applications of ISL8840AMUZ-T? A: ISL8840AMUZ-T is commonly used in applications such as point-of-load regulators, telecom and networking equipment, industrial automation, and LED lighting systems.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.