Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL6554CBZ-T
Details bekijken DataSheets

ISL6554CBZ-T

Product Overview

Category

ISL6554CBZ-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range

Package

ISL6554CBZ-T is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of ISL6554CBZ-T lies in its ability to regulate and stabilize voltage levels in electronic circuits.

Packaging/Quantity

ISL6554CBZ-T is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 4A
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: 500kHz

Pin Configuration

ISL6554CBZ-T has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin for voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the IC on/off
  6. SS: Soft-start pin for gradual voltage ramp-up
  7. PGND: Power ground
  8. VOUT: Output voltage

Functional Features

  • Voltage regulation: ISL6554CBZ-T ensures a stable output voltage regardless of input variations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.
  • Soft-start functionality: The soft-start feature allows for a gradual increase in output voltage during startup, preventing sudden voltage spikes.
  • Enable/disable control: The EN pin enables or disables the IC as per the system requirements.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact size allows for space-saving in electronic designs.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited maximum output current of 4A may not be suitable for high-power applications.
  • Operating temperature range might restrict usage in extreme environmental conditions.

Working Principles

ISL6554CBZ-T operates based on a pulse-width modulation (PWM) technique. It regulates the output voltage by adjusting the duty cycle of the internal switching transistor. This control mechanism ensures that the output voltage remains constant despite fluctuations in the input voltage.

Detailed Application Field Plans

ISL6554CBZ-T finds applications in various fields, including but not limited to: 1. Power supplies for computer peripherals 2. Battery charging circuits 3. Industrial automation systems 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL6554CBZ-T are: 1. LM2576-ADJ 2. LT1084CP-5 3. TPS5430DDAR 4. MAX5033DASA 5. MC34063ADR

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, ISL6554CBZ-T is an integrated circuit commonly used for voltage regulation in electronic devices. Its compact size, high efficiency, and wide input voltage range make it suitable for various applications. However, its limited maximum output current and operating temperature range should be taken into consideration. The detailed pin configuration, functional features, working principles, application field plans, and alternative models provide a comprehensive understanding of this product.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL6554CBZ-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL6554CBZ-T in technical solutions:

  1. Q: What is ISL6554CBZ-T? A: ISL6554CBZ-T is a synchronous buck controller IC designed for high-performance power supply applications.

  2. Q: What is the input voltage range supported by ISL6554CBZ-T? A: The input voltage range supported by ISL6554CBZ-T is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6554CBZ-T? A: The output voltage range that can be achieved using ISL6554CBZ-T depends on the external components used, but it can typically range from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL6554CBZ-T can handle? A: ISL6554CBZ-T can handle a maximum output current of up to 25A.

  5. Q: Does ISL6554CBZ-T support adjustable switching frequency? A: Yes, ISL6554CBZ-T supports adjustable switching frequency, allowing flexibility in designing the power supply.

  6. Q: Can ISL6554CBZ-T operate in a synchronous rectification mode? A: Yes, ISL6554CBZ-T can operate in both synchronous and non-synchronous rectification modes.

  7. Q: What protection features does ISL6554CBZ-T offer? A: ISL6554CBZ-T offers various protection features such as overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Q: Is ISL6554CBZ-T suitable for battery-powered applications? A: Yes, ISL6554CBZ-T is suitable for battery-powered applications as it supports a wide input voltage range and offers efficient power conversion.

  9. Q: Can ISL6554CBZ-T be used in automotive applications? A: Yes, ISL6554CBZ-T can be used in automotive applications as it meets the necessary automotive standards and has a wide input voltage range.

  10. Q: What package does ISL6554CBZ-T come in? A: ISL6554CBZ-T comes in a 16-lead SOIC package, which is commonly used in electronic circuits.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.