ISL6535CRZ-T

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low power consumption - Compact size - Wide input voltage range - Multiple protection features

Package: 48-Lead QFN (Quad Flat No-Lead)

Essence: The ISL6535CRZ-T is a power management IC designed for efficient power delivery in various electronic devices.

Packaging/Quantity: The ISL6535CRZ-T is available in a 48-Lead QFN package. The quantity per package may vary depending on the supplier.

Specifications

The ISL6535CRZ-T has the following specifications:

Input Voltage Range: 4.5V to 25V
Output Voltage Range: Programmable from 0.6V to 5.5V
Maximum Output Current: Up to 20A
Efficiency: Up to 95%
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6535CRZ-T has a detailed pin configuration as follows:

VIN: Input voltage
VCC: Supply voltage
GND: Ground
FB1: Feedback voltage for output 1
COMP1: Compensation for output 1
EN1: Enable control for output 1
PG1: Power good indicator for output 1
SW1: Switch node for output 1
LX1: Inductor connection for output 1
BST1: Boost capacitor connection for output 1
FB2: Feedback voltage for output 2
COMP2: Compensation for output 2
EN2: Enable control for output 2
PG2: Power good indicator for output 2
SW2: Switch node for output 2
LX2: Inductor connection for output 2
BST2: Boost capacitor connection for output 2
...

(Note: Detailed pin configuration continues for all pins)

Functional Features

The ISL6535CRZ-T offers the following functional features:

Dual Output: Provides two independent power outputs.
Programmable Output Voltage: Allows users to set the desired output voltage within a wide range.
Current Limiting: Protects the circuit from excessive current flow.
Overvoltage Protection: Prevents damage due to high output voltage.
Undervoltage Lockout: Ensures proper operation under low input voltage conditions.
Soft-Start: Gradually ramps up the output voltage to prevent inrush current.
Power Good Indicator: Signals when the output voltage is within the specified range.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Compact size allows for space-saving designs. - Wide input voltage range accommodates various power sources. - Multiple protection features enhance reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Complex pin configuration may require careful layout considerations.

Working Principles

The ISL6535CRZ-T operates based on a switching regulator topology. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. The IC continuously monitors the feedback voltage and adjusts the duty cycle of the switching signal to maintain the desired output voltage. This control mechanism ensures efficient power delivery while minimizing losses.

Detailed Application Field Plans

The ISL6535CRZ-T finds applications in various electronic devices, including but not limited to: - Computers and servers - Telecommunications equipment - Industrial control systems - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

ISL6535CRZ
ISL6535CRZ-T7A
ISL6535CRZ-T13A
ISL6535CRZ-T14A
ISL6535CRZ-T15A
...

(Note: The list of alternative models continues)

Please note that the above list is not exhaustive, and there may be other alternative models available in the market.

In conclusion, the ISL6535CRZ-T is a power management IC with high efficiency, multiple protection features, and a wide input voltage range. Its compact size and programmable output voltage make it suitable for various electronic devices. While it has limitations in terms of maximum output current, careful consideration of pin configuration and layout can ensure optimal performance.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL6535CRZ-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL6535CRZ-T in technical solutions:

Q: What is ISL6535CRZ-T? A: ISL6535CRZ-T is a highly integrated dual synchronous buck controller designed for use in various power supply applications.
Q: What is the input voltage range supported by ISL6535CRZ-T? A: The input voltage range supported by ISL6535CRZ-T is typically between 4.5V and 28V.
Q: What is the output voltage range that can be achieved using ISL6535CRZ-T? A: The output voltage range that can be achieved using ISL6535CRZ-T depends on the external components used, but it is typically between 0.6V and 5.5V.
Q: Can ISL6535CRZ-T support multiple outputs? A: Yes, ISL6535CRZ-T can support multiple outputs by using external MOSFETs and other components.
Q: What is the maximum switching frequency of ISL6535CRZ-T? A: The maximum switching frequency of ISL6535CRZ-T is typically around 1MHz.
Q: Does ISL6535CRZ-T have built-in protection features? A: Yes, ISL6535CRZ-T has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.
Q: Can ISL6535CRZ-T operate in a wide temperature range? A: Yes, ISL6535CRZ-T is designed to operate in a wide temperature range, typically from -40°C to +85°C.
Q: What is the typical efficiency of ISL6535CRZ-T? A: The typical efficiency of ISL6535CRZ-T depends on the input and output voltage levels, as well as the load conditions. It can achieve high efficiencies above 90%.
Q: Can ISL6535CRZ-T be used in battery-powered applications? A: Yes, ISL6535CRZ-T can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.
Q: Are there any evaluation boards or reference designs available for ISL6535CRZ-T? A: Yes, Intersil provides evaluation boards and reference designs for ISL6535CRZ-T to help users quickly prototype and implement their power supply solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.