Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL6524CB-T
Details bekijken DataSheets

ISL6524CB-T

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 16-Lead SOIC
  • Essence: Power Management IC
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 4A
  • Switching Frequency: 300kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Voltage
  4. COMP: Compensation
  5. SS/TR: Soft-Start/Tracking
  6. EN: Enable
  7. PGND: Power Ground
  8. BOOT: Bootstrap
  9. LX: Switch Node
  10. VCC: Supply Voltage
  11. VREF: Reference Voltage
  12. OCSET: Overcurrent Set
  13. OCP: Overcurrent Protection
  14. SS/TR: Soft-Start/Tracking
  15. PGOOD: Power Good
  16. VSENSE: Current Sense

Functional Features

  • Integrated synchronous buck controller
  • Adjustable output voltage
  • Programmable soft-start
  • Overcurrent protection
  • Power good indicator
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages: - High efficiency - Low power consumption - Compact package size - Wide input voltage range

Disadvantages: - Limited maximum output current - Requires external components for operation

Working Principles

The ISL6524CB-T is a voltage regulator integrated circuit that utilizes a synchronous buck controller to efficiently regulate the output voltage. It operates by converting the input voltage to a lower, regulated output voltage using a power MOSFET and an inductor. The feedback voltage is compared to a reference voltage, and the controller adjusts the duty cycle of the MOSFET to maintain the desired output voltage.

Detailed Application Field Plans

The ISL6524CB-T is commonly used in various applications that require voltage regulation, such as:

  1. Power supplies for computer peripherals
  2. Networking equipment
  3. Industrial control systems
  4. Telecommunications devices
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. LM2576-ADJ: Adjustable Voltage Regulator, 3A Output Current
  2. LT1763-3.3: Fixed Voltage Regulator, 500mA Output Current
  3. TPS54331-Q1: Automotive Grade Voltage Regulator, 3A Output Current
  4. MAX15062: High-Efficiency Voltage Regulator, 2A Output Current
  5. AP6503: Low Dropout Voltage Regulator, 1.5A Output Current

These alternative models offer similar functionality and can be considered as substitutes for the ISL6524CB-T in different applications.

In conclusion, the ISL6524CB-T is a versatile voltage regulator integrated circuit with high efficiency and low power consumption. Its compact package and wide input voltage range make it suitable for various applications. However, it has limitations in terms of maximum output current and requires external components for operation. There are several alternative models available that offer similar features and can be used as replacements if needed.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL6524CB-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL6524CB-T in technical solutions:

  1. Q: What is ISL6524CB-T? A: ISL6524CB-T is a highly integrated dual-output PWM controller designed for use in various power supply applications.

  2. Q: What are the key features of ISL6524CB-T? A: Some key features include dual synchronous buck PWM controllers, integrated gate drivers, adjustable switching frequency, and overcurrent protection.

  3. Q: What is the input voltage range supported by ISL6524CB-T? A: The input voltage range supported is typically between 4.5V and 5.5V.

  4. Q: What is the maximum output current that can be handled by ISL6524CB-T? A: The maximum output current depends on the external components used, but it can typically handle up to several amps per channel.

  5. Q: Can ISL6524CB-T operate in a wide temperature range? A: Yes, ISL6524CB-T is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  6. Q: How many outputs does ISL6524CB-T support? A: ISL6524CB-T supports two independent outputs, making it suitable for applications requiring multiple power rails.

  7. Q: Does ISL6524CB-T have any built-in protection features? A: Yes, ISL6524CB-T includes overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  8. Q: Can ISL6524CB-T be used in battery-powered applications? A: Yes, ISL6524CB-T can be used in battery-powered applications as long as the input voltage is within the specified range.

  9. Q: What type of load can ISL6524CB-T drive? A: ISL6524CB-T can drive a variety of loads, including resistive, inductive, and capacitive loads.

  10. Q: Are there any application notes or reference designs available for ISL6524CB-T? A: Yes, Intersil provides application notes and reference designs that can help users implement ISL6524CB-T in their specific technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your application. It is always recommended to refer to the datasheet and other technical documentation provided by the manufacturer for accurate information.