Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL62881CHRTZ-T
Details bekijken DataSheets

ISL62881CHRTZ-T

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low dropout voltage - Wide input voltage range - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection

Package: CHRTZ-T (Thin Shrink Small Outline Package)

Essence: The ISL62881CHRTZ-T is a voltage regulator IC designed for various applications that require stable and regulated power supply.

Packaging/Quantity: The ISL62881CHRTZ-T is available in a thin shrink small outline package. The quantity per package may vary depending on the supplier.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 3A
  • Dropout Voltage: 200mV at 3A
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL62881CHRTZ-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin to control the regulator's operation
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin for stability optimization
  7. SS: Soft-start pin for gradual output voltage rise
  8. PG: Power good indicator pin

Functional Features

  • High efficiency conversion of input voltage to regulated output voltage
  • Overcurrent protection to prevent damage to the IC and connected devices
  • Thermal shutdown protection to prevent overheating
  • Adjustable output voltage to meet specific requirements
  • Soft-start function for controlled startup and reduced inrush current

Advantages and Disadvantages

Advantages: - High efficiency results in less power dissipation - Wide input voltage range allows for versatile applications - Adjustable output voltage provides flexibility - Overcurrent and thermal shutdown protection enhance reliability

Disadvantages: - Dropout voltage may affect performance in low input voltage scenarios - Limited maximum output current of 3A may not be suitable for high-power applications

Working Principles

The ISL62881CHRTZ-T operates as a voltage regulator by taking an input voltage within the specified range and converting it to a stable and regulated output voltage. It achieves this through internal circuitry that adjusts the voltage based on feedback received from the FB pin. The regulator also incorporates various protection mechanisms, such as overcurrent and thermal shutdown, to ensure safe operation.

Detailed Application Field Plans

The ISL62881CHRTZ-T can be used in a wide range of applications, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial equipment - Automotive electronics - Communication systems

Detailed and Complete Alternative Models

  1. ISL62882CHRTZ-T
  2. ISL62883CHRTZ-T
  3. ISL62884CHRTZ-T
  4. ISL62885CHRTZ-T
  5. ISL62886CHRTZ-T

These alternative models offer similar functionality and characteristics to the ISL62881CHRTZ-T, providing options for different requirements and specifications.

Note: The content provided above is approximately 300 words. Additional information or details can be added to meet the required word count of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL62881CHRTZ-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL62881CHRTZ-T in technical solutions:

  1. Q: What is ISL62881CHRTZ-T? A: ISL62881CHRTZ-T is a high-performance, multiphase buck controller designed for advanced microprocessors.

  2. Q: What is the input voltage range supported by ISL62881CHRTZ-T? A: The input voltage range supported by ISL62881CHRTZ-T is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be regulated using ISL62881CHRTZ-T? A: ISL62881CHRTZ-T can regulate output voltages as low as 0.6V and as high as 5.5V.

  4. Q: How many phases does ISL62881CHRTZ-T support? A: ISL62881CHRTZ-T supports up to 6 phases, making it suitable for high-current applications.

  5. Q: Can ISL62881CHRTZ-T operate in a synchronous or non-synchronous mode? A: Yes, ISL62881CHRTZ-T can operate in both synchronous and non-synchronous modes, providing flexibility in design.

  6. Q: Does ISL62881CHRTZ-T have any built-in protection features? A: Yes, ISL62881CHRTZ-T includes various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: What is the maximum switching frequency supported by ISL62881CHRTZ-T? A: ISL62881CHRTZ-T supports a maximum switching frequency of 1MHz, allowing for efficient power conversion.

  8. Q: Can ISL62881CHRTZ-T be used in battery-powered applications? A: Yes, ISL62881CHRTZ-T can be used in battery-powered applications as it supports a wide input voltage range and low output voltages.

  9. Q: Is there any adjustable soft-start feature in ISL62881CHRTZ-T? A: Yes, ISL62881CHRTZ-T includes an adjustable soft-start feature to control the startup time and reduce inrush current.

  10. Q: What is the package type of ISL62881CHRTZ-T? A: ISL62881CHRTZ-T is available in a compact 40-lead QFN package, which is suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.