Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
HIP6013CB
Details bekijken DataSheets

HIP6013CB

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Ceramic Ball Grid Array (CBGA)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The HIP6013CB has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. COMP: Compensation Pin
  6. SS/TR: Soft-Start/Tracking Pin
  7. VCC: Supply Voltage
  8. PGND: Power Ground
  9. BOOT: Bootstrap Capacitor Connection
  10. LX: Switch Node
  11. BST: Boost Capacitor Connection
  12. AGND: Analog Ground
  13. OCSET: Overcurrent Protection Threshold Setting
  14. SS/TR: Soft-Start/Tracking Pin
  15. VSENSE: Current Sense Input
  16. VOUT: Output Voltage

Functional Features

  • High Efficiency: The HIP6013CB utilizes advanced control techniques to achieve high efficiency power conversion.
  • Low Power Consumption: The integrated circuit minimizes power losses, resulting in reduced energy consumption.
  • Overcurrent Protection: The OCSET pin allows for setting the threshold at which the device shuts down to protect against excessive current.

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Low power consumption
  • Overcurrent protection for enhanced safety

Disadvantages

  • Limited input voltage range (4.5V to 28V)
  • Maximum output current limited to 3A

Working Principles

The HIP6013CB is a voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output.

Detailed Application Field Plans

The HIP6013CB is commonly used in various applications, including:

  1. Power Supplies: The voltage regulator is suitable for powering electronic devices, such as computers, telecommunication equipment, and industrial machinery.
  2. Automotive Electronics: The device can be utilized in automotive applications, providing stable power for various systems, including infotainment, lighting, and sensors.
  3. Consumer Electronics: The HIP6013CB finds application in consumer electronics, such as smartphones, tablets, and gaming consoles, ensuring reliable power delivery.

Detailed and Complete Alternative Models

  1. HIP6012CB: Similar to HIP6013CB but with a lower maximum output current of 2A.
  2. HIP6014CB: Similar to HIP6013CB but with a higher maximum output current of 4A.
  3. HIP6015CB: Similar to HIP6013CB but with an extended input voltage range of 4.5V to 36V.

These alternative models provide flexibility in choosing a voltage regulator based on specific requirements.

Word count: 407 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van HIP6013CB in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of HIP6013CB in technical solutions:

  1. Q: What is HIP6013CB? A: HIP6013CB is a high-performance, synchronous buck controller IC used in power supply applications.

  2. Q: What is the input voltage range supported by HIP6013CB? A: HIP6013CB supports an input voltage range of 4.5V to 28V.

  3. Q: What is the output voltage range that can be achieved using HIP6013CB? A: The output voltage range achievable with HIP6013CB is typically from 0.8V to 5.5V.

  4. Q: Can HIP6013CB handle high current loads? A: Yes, HIP6013CB is designed to handle high current loads, making it suitable for various power-hungry applications.

  5. Q: Does HIP6013CB have built-in protection features? A: Yes, HIP6013CB incorporates several protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  6. Q: Is HIP6013CB suitable for battery-powered applications? A: Yes, HIP6013CB is well-suited for battery-powered applications due to its low quiescent current and high efficiency.

  7. Q: Can HIP6013CB operate in a wide temperature range? A: Yes, HIP6013CB has a wide operating temperature range of -40°C to +85°C, making it suitable for various environments.

  8. Q: What control methods does HIP6013CB support? A: HIP6013CB supports both voltage mode control and current mode control, providing flexibility in different applications.

  9. Q: Can HIP6013CB be used in parallel to increase output current? A: Yes, HIP6013CB can be easily configured in parallel to increase the output current capability.

  10. Q: What are some typical applications of HIP6013CB? A: HIP6013CB is commonly used in various technical solutions such as servers, telecom equipment, industrial systems, and high-performance computing.

Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.