Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
HIP6006CBZ-T
Details bekijken DataSheets

HIP6006CBZ-T

Product Overview

Category

HIP6006CBZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • Compact size
  • High efficiency

Package

HIP6006CBZ-T is available in a small package, typically a 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of HIP6006CBZ-T lies in its ability to efficiently manage power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a typical quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V - 60V
  • Output Voltage Range: 0.8V - 55V
  • Maximum Output Current: 1A
  • Switching Frequency: 200kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Supply voltage pin
  4. EN: Enable pin
  5. FB: Feedback pin
  6. COMP: Compensation pin
  7. SS: Soft-start pin
  8. PGND: Power ground pin
  9. SW: Switch pin
  10. BOOT: Bootstrap pin
  11. LX: Inductor connection pin
  12. BST: Boost capacitor connection pin
  13. AGND: Analog ground pin
  14. VREF: Reference voltage pin
  15. UVLO: Undervoltage lockout pin
  16. OVLO: Overvoltage lockout pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency power conversion ensures minimal energy loss.
  • Integrated protection features such as undervoltage and overvoltage lockout enhance device safety.
  • Soft-start functionality prevents excessive inrush current during startup.

Advantages and Disadvantages

Advantages

  • Wide input voltage range enables compatibility with various power sources.
  • High efficiency leads to reduced power consumption and heat generation.
  • Integrated protection features enhance device reliability and longevity.
  • Compact size allows for space-saving designs.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Higher cost compared to non-integrated power management solutions.

Working Principles

HIP6006CBZ-T operates based on a switching regulator topology. It utilizes a combination of control circuitry, power MOSFETs, and passive components to efficiently convert the input voltage to the desired output voltage. The integrated control circuitry ensures stable and regulated output voltage by continuously monitoring and adjusting the switching frequency and duty cycle.

Detailed Application Field Plans

HIP6006CBZ-T finds applications in various fields, including but not limited to: - Industrial automation - Automotive electronics - Telecommunications - Consumer electronics - Renewable energy systems

Detailed and Complete Alternative Models

  1. HIP6006CBZ: Similar to HIP6006CBZ-T, but without the "-T" suffix indicating the package type.
  2. HIP6006CBZ-TR: Tape and reel packaging option for automated assembly.
  3. HIP6006CBZ-CR: Cut tape packaging option for manual assembly.

These alternative models offer similar functionality and specifications, providing flexibility in choosing the most suitable option for specific application requirements.

Word count: 507 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van HIP6006CBZ-T in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of HIP6006CBZ-T in technical solutions:

  1. Q: What is HIP6006CBZ-T? A: HIP6006CBZ-T is a high-performance, synchronous buck controller IC designed for use in various power supply applications.

  2. Q: What is the input voltage range supported by HIP6006CBZ-T? A: HIP6006CBZ-T supports an input voltage range from 4.5V to 60V, making it suitable for a wide range of applications.

  3. Q: What is the output voltage range that can be achieved using HIP6006CBZ-T? A: The output voltage range of HIP6006CBZ-T depends on the external components used in the design. It can support output voltages as low as 0.8V.

  4. Q: Can HIP6006CBZ-T handle high current loads? A: Yes, HIP6006CBZ-T is capable of driving high current loads with its integrated MOSFET drivers and external power MOSFETs.

  5. Q: Is HIP6006CBZ-T suitable for battery-powered applications? A: Yes, HIP6006CBZ-T is suitable for battery-powered applications as it offers excellent efficiency and low quiescent current, helping to conserve battery life.

  6. Q: Does HIP6006CBZ-T have any protection features? A: Yes, HIP6006CBZ-T includes various protection features such as overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  7. Q: Can HIP6006CBZ-T operate in a wide temperature range? A: Yes, HIP6006CBZ-T has a wide operating temperature range of -40°C to 125°C, making it suitable for various environments.

  8. Q: What control methods are supported by HIP6006CBZ-T? A: HIP6006CBZ-T supports voltage mode control and current mode control, providing flexibility in different system designs.

  9. Q: Can HIP6006CBZ-T be used in parallel to increase output current? A: Yes, HIP6006CBZ-T can be easily paralleled to increase the output current capability, allowing for higher power applications.

  10. Q: Are there any evaluation boards or reference designs available for HIP6006CBZ-T? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for HIP6006CBZ-T, which can help in the development process and accelerate time-to-market.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.