Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
EL5225IRZ
Details bekijken DataSheets

EL5225IRZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: High-speed, low-power, rail-to-rail output
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Operational amplifier
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: ±2.5V to ±6V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 100MHz
  • Slew Rate: 200V/µs
  • Input Bias Current: ±10nA (maximum)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The EL5225IRZ has a total of 8 pins:

  1. V+ (Positive Supply Voltage)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V- (Negative Supply Voltage)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. VCC (Supply Voltage)

Functional Features

  • High-speed amplification with a gain bandwidth product of 100MHz
  • Low-power consumption for efficient operation
  • Rail-to-rail output allows the output voltage to swing close to the supply rails
  • Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages: - High-speed performance suitable for demanding applications - Low-power consumption for energy-efficient designs - Rail-to-rail output enables maximum utilization of the supply voltage range

Disadvantages: - Limited input offset voltage range may require additional compensation circuitry in some precision applications - Restricted supply voltage range compared to some other amplifiers in the market

Working Principles

The EL5225IRZ is an operational amplifier that amplifies the difference between its inverting and non-inverting inputs. It operates by using a feedback mechanism to maintain the desired output voltage based on the input signals. The rail-to-rail output allows the amplifier to provide maximum output swing, minimizing distortion.

Detailed Application Field Plans

The EL5225IRZ is commonly used in various applications, including:

  1. Audio amplification
  2. Signal conditioning
  3. Sensor interfaces
  4. Data acquisition systems
  5. Active filters
  6. Instrumentation amplifiers

Detailed and Complete Alternative Models

  1. LM324: General-purpose operational amplifier with low power consumption
  2. AD822: Precision instrumentation amplifier with low noise and high accuracy
  3. TL072: Dual operational amplifier with low noise and wide bandwidth
  4. LT1498: Rail-to-rail input/output operational amplifier with low distortion

These alternative models offer similar functionality and can be considered as substitutes for the EL5225IRZ depending on specific requirements.

Word count: 314 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van EL5225IRZ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of EL5225IRZ in technical solutions:

  1. Question: What is EL5225IRZ?
    Answer: EL5225IRZ is a specific model of integrated circuit (IC) used for driving infrared (IR) LEDs in various technical applications.

  2. Question: What are the typical applications of EL5225IRZ?
    Answer: EL5225IRZ is commonly used in applications such as remote controls, proximity sensors, security systems, and IR communication devices.

  3. Question: What is the maximum voltage that EL5225IRZ can handle?
    Answer: EL5225IRZ has a maximum supply voltage rating of typically around 5 volts.

  4. Question: How many IR LEDs can EL5225IRZ drive simultaneously?
    Answer: EL5225IRZ can drive up to four IR LEDs in parallel, making it suitable for applications requiring multiple light sources.

  5. Question: Does EL5225IRZ have any built-in protection features?
    Answer: Yes, EL5225IRZ incorporates over-temperature and over-current protection to ensure safe operation and prevent damage to the IC.

  6. Question: Can EL5225IRZ be used with different types of IR LEDs?
    Answer: Yes, EL5225IRZ is compatible with various types of IR LEDs, including both standard and high-power variants.

  7. Question: What is the maximum current that EL5225IRZ can deliver to each LED?
    Answer: EL5225IRZ can deliver a maximum current of typically around 100 mA to each individual LED.

  8. Question: Does EL5225IRZ require any external components for operation?
    Answer: Yes, EL5225IRZ requires external resistors to set the desired LED current and a decoupling capacitor for stable operation.

  9. Question: Can EL5225IRZ be used in battery-powered applications?
    Answer: Yes, EL5225IRZ is designed to operate efficiently in low-power applications, making it suitable for battery-powered devices.

  10. Question: Is EL5225IRZ available in different package options?
    Answer: Yes, EL5225IRZ is available in various package options, including surface-mount packages like SOIC and QFN, providing flexibility for different PCB designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of EL5225IRZ.