Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
TLE42662GHTMA2

TLE42662GHTMA2

Product Overview

Category

TLE42662GHTMA2 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overtemperature protection
  • Short-circuit protection

Package

The TLE42662GHTMA2 comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic circuits.

Packaging/Quantity

The TLE42662GHTMA2 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 40V
  • Output Voltage Range: 1.2V to 37V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The TLE42662GHTMA2 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin
  5. NC: No connection pin

Functional Features

  • High voltage accuracy
  • Low output voltage noise
  • Fast transient response
  • Adjustable output voltage
  • Thermal shutdown protection

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage minimizes power dissipation
  • Overtemperature and short-circuit protection enhance reliability
  • Small package size enables space-saving designs

Disadvantages

  • Limited output current capability
  • Higher cost compared to some alternative models

Working Principles

The TLE42662GHTMA2 operates based on a voltage regulation principle. It takes an input voltage and regulates it to provide a stable output voltage, even under varying load conditions. This is achieved through the use of internal circuitry that adjusts the voltage as necessary.

Detailed Application Field Plans

The TLE42662GHTMA2 finds applications in various fields, including:

  1. Automotive electronics: Used in vehicle power management systems.
  2. Industrial automation: Provides regulated voltage for control systems.
  3. Consumer electronics: Used in portable devices, such as smartphones and tablets.
  4. Telecommunications: Ensures stable voltage supply in communication equipment.

Detailed and Complete Alternative Models

  1. TPS7A4700: A voltage regulator with similar characteristics and package size.
  2. LM1117: Another popular voltage regulator with adjustable output voltage.
  3. LT1763: Offers low dropout voltage and high accuracy.

These alternative models can be considered based on specific requirements and design constraints.

In conclusion, the TLE42662GHTMA2 is a voltage regulator that provides stable and regulated voltage for electronic circuits. Its wide input voltage range, low dropout voltage, and protection features make it suitable for various applications. However, it has limitations in terms of output current capability and cost. Designers may also consider alternative models depending on their specific needs.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TLE42662GHTMA2 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of TLE42662GHTMA2 in technical solutions:

  1. Q: What is the TLE42662GHTMA2? A: The TLE42662GHTMA2 is a voltage regulator IC (integrated circuit) designed for automotive applications.

  2. Q: What is the input voltage range of TLE42662GHTMA2? A: The input voltage range of TLE42662GHTMA2 is typically between 5.5V and 45V.

  3. Q: What is the output voltage range of TLE42662GHTMA2? A: The output voltage range of TLE42662GHTMA2 is adjustable from 3.3V to 40V.

  4. Q: What is the maximum output current of TLE42662GHTMA2? A: The maximum output current of TLE42662GHTMA2 is 200mA.

  5. Q: Is TLE42662GHTMA2 suitable for automotive applications? A: Yes, TLE42662GHTMA2 is specifically designed for automotive applications and meets the necessary requirements.

  6. Q: Does TLE42662GHTMA2 have built-in protection features? A: Yes, TLE42662GHTMA2 includes various protection features such as overvoltage protection, thermal shutdown, and short-circuit protection.

  7. Q: Can TLE42662GHTMA2 operate in harsh environments? A: Yes, TLE42662GHTMA2 is designed to withstand harsh automotive environments, including high temperatures and voltage transients.

  8. Q: How can I adjust the output voltage of TLE42662GHTMA2? A: The output voltage of TLE42662GHTMA2 can be adjusted using external resistors connected to the feedback pin.

  9. Q: What is the typical efficiency of TLE42662GHTMA2? A: The typical efficiency of TLE42662GHTMA2 is around 90%, depending on the input and output voltage conditions.

  10. Q: Are there any application notes or reference designs available for TLE42662GHTMA2? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing TLE42662GHTMA2 in various technical solutions.

Please note that these answers are general and may vary depending on specific datasheet and application requirements.