Infineon Technologies
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
IRU1209CSPBF
Details bekijken DataSheets

IRU1209CSPBF

Product Overview

The IRU1209CSPBF belongs to the category of voltage regulators and is commonly used in electronic devices to maintain a stable voltage supply. Its characteristics include high efficiency, low dropout voltage, and thermal shutdown protection. The package type is a compact surface-mount device, and it is available in various quantities per package.

Specifications

  • Input Voltage Range: 2.5V to 18V
  • Output Voltage Range: 0.8V to 16V
  • Maximum Output Current: 3A
  • Dropout Voltage: 300mV at 3A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The IRU1209CSPBF has a standard pin configuration with input, output, and ground pins, along with additional pins for features such as enable and thermal shutdown.

Functional Features

  • High Efficiency: The voltage regulator offers high efficiency, minimizing power loss during operation.
  • Thermal Shutdown Protection: It includes built-in thermal shutdown protection to prevent damage from excessive heat.
  • Low Dropout Voltage: The low dropout voltage ensures stable operation even when the input voltage is close to the output voltage.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact package size

Disadvantages

  • Limited maximum output current compared to some other models
  • Sensitive to improper handling due to its small size

Working Principles

The IRU1209CSPBF operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage despite variations in the input voltage or load.

Detailed Application Field Plans

The IRU1209CSPBF is commonly used in various electronic devices, including: - Portable electronic devices - Battery-powered systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the IRU1209CSPBF include: - LM317: A widely used adjustable voltage regulator with similar characteristics - LT1086: Offers higher maximum output current and lower dropout voltage

In conclusion, the IRU1209CSPBF is a versatile voltage regulator suitable for a wide range of applications, offering high efficiency and reliable performance within its specified operating conditions.

[Word count: 314]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van IRU1209CSPBF in technische oplossingen

Sure, here are 10 common questions and answers related to the application of IRU1209CSPBF in technical solutions:

  1. What is the IRU1209CSPBF?

    • The IRU1209CSPBF is a high-performance synchronous buck voltage regulator IC designed for use in various power management applications.

  2. What is the input voltage range of the IRU1209CSPBF?

    • The input voltage range of the IRU1209CSPBF is typically from 4.5V to 21V.

  3. What is the output voltage range of the IRU1209CSPBF?

    • The output voltage range of the IRU1209CSPBF is programmable from 0.6V to 12V.

  4. What is the maximum output current of the IRU1209CSPBF?

    • The IRU1209CSPBF can deliver a maximum output current of up to 25A.

  5. What is the switching frequency of the IRU1209CSPBF?

    • The switching frequency of the IRU1209CSPBF is typically set at 300kHz to 1MHz.

  6. What are the key features of the IRU1209CSPBF?

    • The key features of the IRU1209CSPBF include high efficiency, wide input voltage range, programmable output voltage, and overcurrent protection.

  7. What are the typical applications of the IRU1209CSPBF?

    • The IRU1209CSPBF is commonly used in applications such as point-of-load regulation, industrial equipment, telecom infrastructure, and networking systems.

  8. How does the IRU1209CSPBF handle thermal management?

    • The IRU1209CSPBF incorporates thermal shutdown and overtemperature protection to ensure reliable operation under varying thermal conditions.

  9. What are the recommended external components for using the IRU1209CSPBF?

    • The recommended external components include input and output capacitors, inductors, and resistors for setting the output voltage.

  10. Is the IRU1209CSPBF suitable for automotive applications?

    • Yes, the IRU1209CSPBF is suitable for automotive applications due to its wide input voltage range and robust design.

I hope these questions and answers provide a good overview of the IRU1209CSPBF and its application in technical solutions. Let me know if you need further information on any specific aspect!