Diodes Incorporated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
DMN24H3D5L-13
Details bekijken DataSheets

DMN24H3D5L-13 Product Overview

Introduction

The DMN24H3D5L-13 belongs to the category of high-performance integrated circuits and is designed for use in electronic devices. This product offers unique characteristics, packaging, and quantity options that make it suitable for a wide range of applications.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Electronic Devices
  • Characteristics: High performance, reliability, compact design
  • Package: Small form factor, surface mount
  • Essence: Advanced semiconductor technology
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The DMN24H3D5L-13 features the following specifications: - Input Voltage: 3.3V - Output Current: 24A - Operating Temperature: -40°C to 125°C - Package Type: Power SO-8

Detailed Pin Configuration

The detailed pin configuration of DMN24H3D5L-13 is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage) 4. NC (No Connection) 5. NC (No Connection) 6. NC (No Connection) 7. EN (Enable) 8. PG (Power Good)

Functional Features

  • High efficiency power conversion
  • Overcurrent protection
  • Thermal shutdown
  • Enable pin for control

Advantages and Disadvantages

Advantages

  • High performance
  • Compact design
  • Reliable operation
  • Overcurrent protection

Disadvantages

  • Limited output current capacity
  • Requires careful thermal management

Working Principles

The DMN24H3D5L-13 operates on the principle of efficient power conversion, utilizing advanced semiconductor technology to regulate input voltage and provide a stable output voltage. The enable pin allows for control over the device's operation, while built-in protections ensure safe and reliable performance.

Detailed Application Field Plans

The DMN24H3D5L-13 is well-suited for various applications, including: - Point-of-load power supplies - Industrial automation - Telecommunications equipment - Server and networking systems

Detailed and Complete Alternative Models

For users seeking alternative models, the following options are available: - DMN24H3D5L-12: Similar specifications with different package type - DMN20H3D5L-13: Lower output current with compatible pin configuration - DMN24H3D5L-15: Higher output current variant within the same series

In conclusion, the DMN24H3D5L-13 offers high-performance power conversion capabilities in a compact package, making it an ideal choice for various electronic applications.

[Word Count: 398]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DMN24H3D5L-13 in technische oplossingen

  1. What is DMN24H3D5L-13?

    • DMN24H3D5L-13 is a high-power, high-frequency RF transistor commonly used in technical solutions for applications such as radar systems and communication equipment.

  2. What are the key specifications of DMN24H3D5L-13?

    • The key specifications of DMN24H3D5L-13 include a frequency range of 2400-2500 MHz, a power output of 13W, and a gain of 13dB.

  3. How is DMN24H3D5L-13 typically used in radar systems?

    • In radar systems, DMN24H3D5L-13 is often used as a power amplifier to boost the signal strength of the radar transmitter, allowing for longer detection ranges and improved performance.

  4. What are the thermal considerations when using DMN24H3D5L-13 in technical solutions?

    • Thermal management is crucial when using DMN24H3D5L-13, as it generates significant heat during operation. Proper heat sinking and thermal design are essential to ensure reliable performance.

  5. Can DMN24H3D5L-13 be used in communication equipment?

    • Yes, DMN24H3D5L-13 is commonly employed in communication equipment such as transceivers and base stations to amplify RF signals for transmission and reception.

  6. What are the typical input and output impedance values for DMN24H3D5L-13?

    • The typical input and output impedance values for DMN24H3D5L-13 are 50 ohms, which is standard for many RF applications.

  7. Are there any special considerations for driving DMN24H3D5L-13 with an RF signal?

    • It's important to ensure that the input RF signal driving DMN24H3D5L-13 is within the specified frequency range and power levels to avoid damaging the transistor.

  8. What are the recommended supply voltage and current for DMN24H3D5L-13?

    • The recommended supply voltage for DMN24H3D5L-13 is typically around 28V, with a corresponding supply current based on the operating conditions and power output requirements.

  9. Can DMN24H3D5L-13 be used in pulsed applications?

    • Yes, DMN24H3D5L-13 is suitable for pulsed applications, and its high-power capabilities make it well-suited for radar and pulse-based communication systems.

  10. What are some common failure modes to watch out for when using DMN24H3D5L-13?

    • Common failure modes include overvoltage, overcurrent, and excessive heat, which can lead to degradation or permanent damage to the transistor. Monitoring these factors is essential for reliable operation.