Zie specificaties voor productdetails.
AZ1085T-5.0E1
Product Overview
Category
AZ1085T-5.0E1 belongs to the category of voltage regulators.
Use
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage Output: 5.0V
- Package Type: TO-220
- Essence: Linear voltage regulator
- Packaging/Quantity: Available in reels or tubes, quantity varies based on manufacturer
Specifications
The specifications for AZ1085T-5.0E1 are as follows:
- Input Voltage Range: 7V to 25V
- Output Voltage: 5.0V
- Output Current: Up to 3A
- Dropout Voltage: 1.5V (typical)
- Line Regulation: 0.2% (typical)
- Load Regulation: 0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
- Package: TO-220
Detailed Pin Configuration
AZ1085T-5.0E1 has three pins:
- Vin (Pin 1): Input voltage pin
- Vout (Pin 2): Output voltage pin
- GND (Pin 3): Ground pin
Functional Features
- High accuracy and low dropout voltage
- Overcurrent and thermal protection
- Fast transient response
- Adjustable output voltage with external resistors
Advantages and Disadvantages
Advantages
- Stable and regulated output voltage
- Wide input voltage range
- Protection against overcurrent and thermal issues
- Suitable for various applications
Disadvantages
- Higher power dissipation compared to switching regulators
- Limited output current capacity
Working Principles
AZ1085T-5.0E1 operates on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage based on the input voltage and load conditions. The internal circuitry compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output.
Detailed Application Field Plans
AZ1085T-5.0E1 finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery chargers - Audio amplifiers - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to AZ1085T-5.0E1 are: - LM317 - LT1085 - LM7805 - LM1117
These models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, AZ1085T-5.0E1 is a voltage regulator widely used in electronic circuits to provide a stable and regulated 5.0V output. Its high accuracy, low dropout voltage, and protection features make it suitable for various applications in different industries.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AZ1085T-5.0E1 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of AZ1085T-5.0E1 in technical solutions:
Q1: What is AZ1085T-5.0E1? A1: AZ1085T-5.0E1 is a voltage regulator IC that provides a fixed output voltage of 5.0V.
Q2: What is the input voltage range for AZ1085T-5.0E1? A2: The input voltage range for AZ1085T-5.0E1 is typically between 6.5V and 25V.
Q3: What is the maximum output current of AZ1085T-5.0E1? A3: The maximum output current of AZ1085T-5.0E1 is 3A.
Q4: Can AZ1085T-5.0E1 be used in both step-up and step-down applications? A4: No, AZ1085T-5.0E1 is a linear voltage regulator and can only be used for step-down applications.
Q5: What is the dropout voltage of AZ1085T-5.0E1? A5: The dropout voltage of AZ1085T-5.0E1 is typically around 1.5V.
Q6: Is AZ1085T-5.0E1 suitable for low-power applications? A6: No, AZ1085T-5.0E1 is designed for medium to high power applications due to its high output current capability.
Q7: Does AZ1085T-5.0E1 require any external components for operation? A7: Yes, AZ1085T-5.0E1 requires input and output capacitors for stability and proper operation.
Q8: Can AZ1085T-5.0E1 handle short-circuit conditions? A8: Yes, AZ1085T-5.0E1 has built-in current limiting and thermal shutdown protection to handle short-circuit conditions.
Q9: What is the typical efficiency of AZ1085T-5.0E1? A9: The typical efficiency of AZ1085T-5.0E1 is around 80-90%, depending on the input and output voltage differentials.
Q10: Can AZ1085T-5.0E1 be used in automotive applications? A10: Yes, AZ1085T-5.0E1 is suitable for automotive applications as it can operate over a wide temperature range and has built-in protection features.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.