Zie specificaties voor productdetails.
AZ1085CS-2.5TRG1
Product Overview
Category
AZ1085CS-2.5TRG1 belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Current limiting and thermal shutdown protection
- Adjustable output voltage
- Wide input voltage range
Package
AZ1085CS-2.5TRG1 comes in a compact TO-263 package.
Essence
The essence of AZ1085CS-2.5TRG1 is to provide a stable and regulated output voltage for various electronic devices.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V to 12V
- Output Voltage Range: 1.25V to 5V
- Output Current: Up to 3A
- Dropout Voltage: 1.3V (typical)
- Line Regulation: ±0.2% (typical)
- Load Regulation: ±0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
AZ1085CS-2.5TRG1 has three pins:
- Vin (Pin 1): Input voltage pin.
- Vout (Pin 2): Output voltage pin.
- GND (Pin 3): Ground pin.
Functional Features
- High Precision: The AZ1085CS-2.5TRG1 provides accurate and stable output voltage regulation, ensuring reliable performance of connected devices.
- Low Dropout Voltage: With a low dropout voltage, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
- Current Limiting and Thermal Shutdown Protection: The device incorporates current limiting and thermal shutdown features to protect itself and the connected circuitry from excessive current or temperature.
- Adjustable Output Voltage: The output voltage can be adjusted within a specified range, providing flexibility for different applications.
- Wide Input Voltage Range: The regulator can accept a wide range of input voltages, making it suitable for various power supply configurations.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance.
- Low dropout voltage allows efficient operation.
- Current limiting and thermal shutdown protection enhance safety.
- Adjustable output voltage provides versatility.
- Wide input voltage range accommodates different power supply setups.
Disadvantages
- Relatively higher cost compared to basic linear regulators.
- Requires additional external components for proper operation.
Working Principles
AZ1085CS-2.5TRG1 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly. This feedback loop ensures that the output voltage remains constant despite variations in the input voltage or load conditions.
Detailed Application Field Plans
AZ1085CS-2.5TRG1 finds applications in various electronic systems, including but not limited to: - Power supplies for microcontrollers and other digital ICs - Battery charging circuits - Audio amplifiers - LED drivers - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models to AZ1085CS-2.5TRG1 include: - LM317 - LT1085 - LM1117 - ADJ1117 - LDO50V
These alternatives offer similar functionality and can be used as substitutes depending on specific requirements and availability.
In conclusion, AZ1085CS-2.5TRG1 is a high-precision voltage regulator with various features and applications. Its ability to provide stable output voltage makes it an essential component in many electronic systems.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AZ1085CS-2.5TRG1 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of AZ1085CS-2.5TRG1 in technical solutions:
Q1: What is AZ1085CS-2.5TRG1? A1: AZ1085CS-2.5TRG1 is a voltage regulator IC that provides a fixed output voltage of 2.5V.
Q2: What is the input voltage range for AZ1085CS-2.5TRG1? A2: The input voltage range for AZ1085CS-2.5TRG1 is typically between 3.6V and 20V.
Q3: What is the maximum output current of AZ1085CS-2.5TRG1? A3: The maximum output current of AZ1085CS-2.5TRG1 is 3A.
Q4: Can AZ1085CS-2.5TRG1 be used in battery-powered applications? A4: Yes, AZ1085CS-2.5TRG1 can be used in battery-powered applications as long as the input voltage is within the specified range.
Q5: Is AZ1085CS-2.5TRG1 suitable for low-power applications? A5: No, AZ1085CS-2.5TRG1 is designed for medium to high power applications due to its high output current capability.
Q6: Does AZ1085CS-2.5TRG1 require any external components for operation? A6: Yes, AZ1085CS-2.5TRG1 requires input and output capacitors for stability and proper operation.
Q7: Can AZ1085CS-2.5TRG1 handle overcurrent or short-circuit conditions? A7: Yes, AZ1085CS-2.5TRG1 has built-in overcurrent and short-circuit protection features to safeguard the circuit.
Q8: What is the typical dropout voltage of AZ1085CS-2.5TRG1? A8: The typical dropout voltage of AZ1085CS-2.5TRG1 is around 1.5V at full load.
Q9: Can AZ1085CS-2.5TRG1 be used in automotive applications? A9: Yes, AZ1085CS-2.5TRG1 is suitable for automotive applications as long as it meets the required specifications and standards.
Q10: Is AZ1085CS-2.5TRG1 available in different package options? A10: Yes, AZ1085CS-2.5TRG1 is available in various package options such as TO-263, TO-220, and D2PAK.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.