Zie specificaties voor productdetails.
AZ1084CS-5.0TRE1
Product Overview
Category
AZ1084CS-5.0TRE1 belongs to the category of voltage regulators.
Use
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage Output: 5.0V
- Package Type: TO-263
- Essence: Linear regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
The specifications for AZ1084CS-5.0TRE1 are as follows:
- Input Voltage Range: 7V to 20V
- Output Voltage: 5.0V ±2%
- Maximum Output Current: 5A
- Dropout Voltage: 1.5V (typical)
- Line Regulation: 0.015% (typical)
- Load Regulation: 0.1% (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The pin configuration for AZ1084CS-5.0TRE1 is as follows:
```
| | --| Vout | --| Vin | --| GND | |___________| ```
Functional Features
- High accuracy and low dropout voltage.
- Overcurrent and thermal protection.
- Fast transient response.
- Adjustable output voltage with external resistors.
Advantages and Disadvantages
Advantages
- Stable and regulated output voltage.
- Wide input voltage range.
- High current capability.
- Protection features ensure safe operation.
Disadvantages
- Higher power dissipation compared to switching regulators.
- Limited efficiency due to linear regulation.
Working Principles
AZ1084CS-5.0TRE1 operates based on the principle of linear regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a constant output voltage despite variations in the input voltage or load conditions.
Detailed Application Field Plans
AZ1084CS-5.0TRE1 finds applications in various electronic devices and systems, including: - Power supplies for microcontrollers and digital circuits. - Battery charging circuits. - Audio amplifiers. - Industrial control systems. - Automotive electronics.
Alternative Models
Some alternative models that can be used as replacements for AZ1084CS-5.0TRE1 include: - LM1084IT-5.0/NOPB - LT1084CT-5.0 - TPS7A4901DGNR
These models offer similar voltage regulation capabilities and package types.
In conclusion, AZ1084CS-5.0TRE1 is a voltage regulator with a 5.0V output voltage and a maximum output current of 5A. It is widely used in various electronic applications due to its stability, accuracy, and protection features. However, it should be noted that it operates with higher power dissipation compared to switching regulators, resulting in lower efficiency.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AZ1084CS-5.0TRE1 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of AZ1084CS-5.0TRE1 in technical solutions:
Q1: What is AZ1084CS-5.0TRE1? A1: AZ1084CS-5.0TRE1 is a voltage regulator IC (Integrated Circuit) that provides a fixed output voltage of 5.0V.
Q2: What is the input voltage range for AZ1084CS-5.0TRE1? A2: The input voltage range for AZ1084CS-5.0TRE1 is typically between 7V and 20V.
Q3: What is the maximum output current of AZ1084CS-5.0TRE1? A3: The maximum output current of AZ1084CS-5.0TRE1 is 5A.
Q4: How does AZ1084CS-5.0TRE1 regulate the output voltage? A4: AZ1084CS-5.0TRE1 uses a feedback mechanism to maintain a constant output voltage of 5.0V, regardless of changes in input voltage or load conditions.
Q5: Can AZ1084CS-5.0TRE1 be used in both step-up and step-down applications? A5: No, AZ1084CS-5.0TRE1 is primarily designed for step-down (buck) applications where the output voltage is lower than the input voltage.
Q6: What is the typical dropout voltage of AZ1084CS-5.0TRE1? A6: The typical dropout voltage of AZ1084CS-5.0TRE1 is around 1.5V.
Q7: Is AZ1084CS-5.0TRE1 suitable for high-temperature environments? A7: Yes, AZ1084CS-5.0TRE1 is designed to operate in a wide temperature range, typically from -40°C to 125°C.
Q8: Can AZ1084CS-5.0TRE1 handle short-circuit conditions? A8: Yes, AZ1084CS-5.0TRE1 has built-in protection features that allow it to withstand short-circuit conditions without damage.
Q9: Does AZ1084CS-5.0TRE1 require any external components for operation? A9: Yes, AZ1084CS-5.0TRE1 requires input and output capacitors for stability and proper operation.
Q10: What are some typical applications of AZ1084CS-5.0TRE1? A10: AZ1084CS-5.0TRE1 is commonly used in various electronic devices and systems, such as power supplies, industrial equipment, automotive electronics, and consumer electronics.
Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and consult with technical experts for accurate information and guidance.