Diodes Incorporated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AP1186K5-L-13
Details bekijken DataSheets

AP1186K5-L-13

Product Overview

Category

AP1186K5-L-13 belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • Compact size
  • High reliability
  • Low power consumption
  • Wide operating temperature range

Package

AP1186K5-L-13 is available in a small surface mount package.

Essence

The essence of this product lies in its ability to provide stable and efficient performance in electronic circuits.

Packaging/Quantity

AP1186K5-L-13 is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V - 5.5V
  • Output Voltage Range: 1.2V - 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 60μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Enable pin for power management control

Advantages and Disadvantages

Advantages

  • Small form factor
  • High efficiency
  • Wide input voltage range
  • Excellent load regulation

Disadvantages

  • Limited maximum output current
  • Sensitive to excessive heat

Working Principles

AP1186K5-L-13 is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage. It achieves this by using a feedback mechanism to continuously adjust the internal circuitry.

Detailed Application Field Plans

AP1186K5-L-13 finds applications in various electronic devices, including: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

  1. AP1186K5-L-12: Similar specifications but with a different output voltage range.
  2. AP1186K5-L-15: Similar specifications but with a higher maximum output current.
  3. AP1186K5-L-10: Similar specifications but with a lower dropout voltage.

These alternative models provide flexibility in choosing the appropriate voltage regulator for specific application requirements.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AP1186K5-L-13 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AP1186K5-L-13 in technical solutions:

  1. Q: What is AP1186K5-L-13? A: AP1186K5-L-13 is a specific model or type of component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of AP1186K5-L-13? A: AP1186K5-L-13 is designed to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: How does AP1186K5-L-13 work? A: AP1186K5-L-13 works by receiving an input voltage and regulating it to provide a stable output voltage, ensuring proper functioning of the circuit.

  4. Q: What are the key features of AP1186K5-L-13? A: Some key features of AP1186K5-L-13 may include high efficiency, low dropout voltage, thermal shutdown protection, and overcurrent protection.

  5. Q: What is the voltage range supported by AP1186K5-L-13? A: AP1186K5-L-13 typically supports a specific voltage range, such as 2.5V to 5.5V, depending on the model.

  6. Q: Can AP1186K5-L-13 handle high currents? A: Yes, AP1186K5-L-13 is designed to handle certain current levels, usually specified in the datasheet. It is important to ensure that the component is not overloaded.

  7. Q: Is AP1186K5-L-13 suitable for battery-powered applications? A: Yes, AP1186K5-L-13 is often used in battery-powered applications due to its low dropout voltage and efficient power management capabilities.

  8. Q: Can AP1186K5-L-13 be used in automotive applications? A: Yes, some variants of AP1186K5-L-13 are designed to meet automotive industry standards and can be used in automotive applications.

  9. Q: Are there any specific precautions when using AP1186K5-L-13? A: It is important to follow the manufacturer's guidelines and datasheet recommendations for proper usage, including input/output voltage limits and thermal considerations.

  10. Q: Where can I find more information about AP1186K5-L-13? A: You can refer to the manufacturer's website or datasheet for detailed specifications, application notes, and other relevant information about AP1186K5-L-13.

Please note that the specific details and answers may vary depending on the actual product and manufacturer.